Search results

  1. sloanstavern

    Transfer case won’t shift high to low - stuck in low

    Got it thank you, this tub does not have a full transmission hump cover it’s the small access panel I didn’t take that apart yet that might make things simpler. I can access the external pivot arm and slip some washers underneath it what should solve the problem however if I see this correctly...
  2. sloanstavern

    Transfer case won’t shift high to low - stuck in low

    Perfect timing, I just came in from playing around with it and discovered the same thing I wedged the control arm up so that the pin was engaged and was able to change gears, what a relief it looks like I only need a quarter inch or so of spacing and I can access the control arm reasonably well...
  3. sloanstavern

    Transfer case won’t shift high to low - stuck in low

    I pulled off the inspection cover after I drained the fluid in the biz visibility is limited not really sure what I’m looking for here’s the best shot I could get of the far end of the transfer case. The shift linkage is rotating the hi-lo neutral arm but it doesn’t appear that anything is...
  4. sloanstavern

    Transfer case won’t shift high to low - stuck in low

    Thanks, I am able to move that by hand and while it rotates the shaft nothings happening internally
  5. sloanstavern

    Transfer case won’t shift high to low - stuck in low

    That was a very polite way of saying I am a knucklehead😜 Just because it’s data doesn’t mean it’s good data……..👍
  6. sloanstavern

    Transfer case won’t shift high to low - stuck in low

    Hey guys I discovered an issue with my transfer case. It appears to be stuck i in low gear. Whether it is in four-wheel-drive or 2 Wheel Dr. ‘82, Non US FJ45, 4 speed Up on the jackstands with the transmission in neutral and the T case in two wheel high I could rotate the rear tires at the...
Top Bottom