Search results

  1. John Galt

    BJ 74 Transfer Case rear output shaft oil seal part #

    thank you
  2. John Galt

    BJ 74 Transfer Case rear output shaft oil seal part #

    What is the part number for the 1989 BJ 74 Transfer Case rear output shaft oil seal ? thanks, JG
  3. John Galt

    BJ-74 Transfer case Front shaft seal

    thanks
  4. John Galt

    BJ-74 Transfer case Front shaft seal

    Is 90311-48022 the current number for the seal
  5. John Galt

    BJ-74 Transfer case Front shaft seal

    I will check the breather. What is a good way to check if the bearing is shot ?
  6. John Galt

    BJ-74 Transfer case Front shaft seal

    Is the 1989 BJ-74 Transfer case Front shaft seal part# 90311-48022 or 90311-48010 ? I'm getting both numbers from the online parts listings cruiseroutfit ???
  7. John Galt

    BJ 74 exhaust pipe Aftermarket source N. America?

    Yes that's the part I need. Mine has broken between the flex section and the lower flange. With that part number my local Toyota dealer can order it. Thanks for your help.
  8. John Galt

    BJ 74 exhaust pipe Aftermarket source N. America?

    Thanks. Is there an aftermarket source in the US or Canada?
  9. John Galt

    BJ 74 exhaust pipe Aftermarket source N. America?

    What is the part number of the first downtube section of exhaust off the turbo? Tried search but nothing turned up.
  10. John Galt

    BJ74 rear differential pinion seal

    Yes, the pinion seal. I couldn't remember the correct terminology, now corrected. thank you
  11. John Galt

    BJ74 rear differential pinion seal

    What is the part number for this seal?
  12. John Galt

    Must Remove BJ73 Speedo Alarm

    great idea - just need to find a 24v relay -- thanks
  13. John Galt

    BJ74 fibreglass flares

    I'd be interested if they were available in North America.
  14. John Galt

    Must Remove BJ73 Speedo Alarm

    How can the 105km speed alarm be converted into a "headlights left on" alarm?
  15. John Galt

    Napa oil filters

    Purolator PureOne PL30001 https://www.amazon.ca/gp/product/B000E8XFPU https://www.amazon.com/Purolator-PL30001-PurolatorONE-Oil-Filter/dp/B000E8XFPU
  16. John Galt

    AltFuel Fuel Heating System Idea

    One can add up to 10% premium gasoline in the winter to make cold starts easier. I heat the fuel mix with a Flat Plate Heat Exchanger connected between the fuel feed pump and the OEM fuel filter, it gets hot coolant from the heater circuit. It's mounted on the inner fender on the left side of...
  17. John Galt

    Cold Start Video Thread

    Lower Rad Hose
  18. John Galt

    AltFuel Fuel Heating System Idea

    To make biodiesel work in a cold climate I store B50 mix out in the cold and let the High-Melting-Point-Esters settle out and only pump from the top clear layer for winter fuel. The system is self adjusting. It's much easier to remove the HMPEs before they clog the fuel system regardless of how...
  19. John Galt

    Cold Start Video Thread

    BJ-74 Yukon cold-temperature start procedure: Before shut down the hand throttle is advanced to 1200 RPM The truck has a lower rad hose heater which is plugged in with a timer that preheats the engine coolant for about 6 hours prior to start up when temperatures are below freezing. For the glow...
  20. John Galt

    Brake Fluid

    Any recommended brands? Is 'synthetic' better?
Top Bottom