Search results

I’m looking to buy a carburetor intake manifold setup for a 1fz . I’m trying to make a 1fz-fe run off a sniper FI system for my FJ55 build . I’d also like to find the distributor and any other related pieces I’ll need . Thanks

Thanks for the response . If anyone reads this and has one they want to sell , PM me .

Do you still have this setup ? I need it for a 1fz into FJ55 swap . I’m down in EP Texas . Thanks

I have some questions , I currently have Tors old BJ73 LS3 swapped rig . The 6l80e is giving me the shutters , so it need to be replaced . I was wondering how hard and what I would need to swap in a 8L90e ? I just read the T case should mate up since it’s running a adapter and 80 series T...

More pics

Updated post … I just completed the shackle lift , new proper bilstein shocks for 2-4” lift , new rear brakes with oem drums , new parking brake kit . Ready to drive and enjoy . Selling this 1976 FJ40 to fund my FJ55 build . I bought this truck over two years ago out of Las Cruces NM from a...

My doors are all perfect , thanks .

I need it all . Would you believe it was done probably at least a decade ago .

I’m in El Paso Texas . There is a fellow cruiser head traveling right now in Utah and will be coming back to ABQ NM and then back to Florida and back . If there is anything available along his route he can pick the parts up . I need all the sheet metal I can get front those areas to include...

In search for the floors and firewall form a 1973 FJ55 or year compatible. If the edges of the floors have some minor rust is ok , mine are fine , it’s just someone cut the center sections out for a swap and I want to return the truck to stock . The firewall needs to be from the upper bulkhead...

In search for the floors and firewall form a 1973 FJ55 or year compatible. If the edges of the floors have some minor rust is ok , mine are fine , it’s just someone cut the center sections out for a swap and I want to return the truck to stock . The firewall needs to be from the upper bulkhead...

Thanks for the effort .

Ok, thanks for the reply .

I’m Looking for a choke breaker for a 1981 fj60 ? Anyone have a source to buy them from ?

Yup , I even found some that looked like the same thing on a 1st gen pickup . Ordered the clips and they were too small to work . I ended up finding while assy in a salvage yard. **** Note to anyone trying to remove the controls , remove all cables from the door , valve or vent they connected...

Not the one I have . Built 10/82 and has the normal brown interior . It does have some little odds and ends that differ compared to 82 on .

Mine was from Japan . So far I’ve found the oil pressure sender doesn’t mount under the filter , it attached to the banjo bolt head on the oil cooler . There lights on the cluster are different locations , no 4x4 light , different turn signal stock , no choke light of the manual choke …...

Where are the other 2600 units , if only 1000 were supposedly sold in 1981? That’s my question .