Search results

https://store.airdowngearup.com/ They have done a few posts here. https://forum.ih8mud.com/threads/airdowngearup-ss1-storage-sleeper-and-drawer-system-for-80-series.1254126/

correct the plates are cut around the armrest to fit but just on the bottom side. Little more detail in my build. attachment front system: Top secure point is to the extrusion, I used my 1/4-20 threaded rod instead of their bolts, bottom is to either seat mount bolt thread. It provides (2)...

I was hoping to put in in one of the drawers and not even close... I could maybe unfold it and fill an entire drawer but doesn't seem to be smart. You right, it does pack in a bit big but I assume a good thing, easier to do it's job. It does stuff between the Delta modular storage and the GG...

Total height including plate is 8 3/4" at the rear, with the slant of the 80 floor I assume this is much taller in the front. They do place bottom fillers on the front to keep it level. If not sure what I'm talking about pull the seats and carper and you will see a rather large left to right...

Correct, the tall seat delete matches the drawers, the sleeping platform matches the rear plate( which is required in both situations) The sleeping platform will be between the fenders and placed on the body( May start to float up front) leaving much less sleeping room. The drawer and high seat...

I have some good and bad new from what I see for you on this. If you do their sleeper package, that's fine and the front looks to mount more solid than the rear surprisingly. This would give you a solid flat floor you can use and pull each or both front plates like the seat delete. Looks like a...

I have high hopes!!!! I hung the Delta side panels and was laying on it planning things out after inflating and about fell asleep!!!😂 It's [retty breezy and cold out and I think it warmed the interior up quick just from my body heat pulling into the mat. The sleeping platform would be light...

If you do the drawers and platform this fits damn good, perfect fit! Took a bit to level the front.

These pictures are all from this weekend. I have a marine battery, Redark system, OBA, and probably more I'm forgetting ready and waiting. I'll be adding to my build but as always time is tight. I'll be happy to give out close-ups of anything I can including assembly.

If you do the front plates first for the sleeping package you may let them know if you expand and add the platform. It's possible they will trim the platform to fit. I had the Dynomat so had to make several adjustments and get longer bolts, The base has a ton of threadserts, I think they are...

The area in the 2nd row delete is huge, thank god, I have a lot planned for the area. Really good access and with the 1/4-20 studs I can pull 2 panels per side easy if needed, The 2 hatch doors each side are lockable and also easy access.

I added some 1/4-20 threaded posts with lock washer and it made it much easier to assemble the panels.

Funny you ask. I have had the set with 50/50 drawers wrapped up in the back of the 80 for a month. Got it in this weekend. It's very well built. There is little to no detailed information on these online, no instructions, pretty straight forward tho. The only plate is the rear if you go 2nd...