Search results

  1. bigredmachine

    Builds Cummins R2.8 H151 Swap into 1993 FZJ80

    those should fit 1/2 outer diameter as trans cooler lines are 3/8 inner diameter. if its a clamp for the coolant lines going to the cooler it should be about 3/4 outer diameter
  2. bigredmachine

    Builds Cummins R2.8 H151 Swap into 1993 FZJ80

    those were typicaly used on coolant lines, should be able to dig them up off a v6 camry in the 07-12 range. ill see what I can dig up at work. if your dealing with smaller lines and liking for a similar line clamp there is one that you would be able to hard mount, you can get those off of a p/s...
  3. bigredmachine

    Airbag question

    cdl will not disable the airbags, it will only lock the cdl and turn off abs
  4. bigredmachine

    Techstream resulted in VSC TRAC, VSC OFF, and blinking VGRS

    looks like the cable is no good. probably still a good idea to check the can lines pins at the dlc for correct resistance
  5. bigredmachine

    Techstream resulted in VSC TRAC, VSC OFF, and blinking VGRS

    yes there is a sil line but it is used a back up to typically srs and abs in the event that there is no can communication. ahc, vgsr is probably a lin system with bus comunication
  6. bigredmachine

    Techstream resulted in VSC TRAC, VSC OFF, and blinking VGRS

    well if it only the issue only started after the vci cable was used than it would stand to reason that that could possibly be the issue, I would still try to find a known good cable and try that before throwing another cable at it.
  7. bigredmachine

    Techstream resulted in VSC TRAC, VSC OFF, and blinking VGRS

    its possible that it could be an issue with the cable, have you ever used it before or was this the first time using it. if theres someone else in the area with a known good cable id try that before buying a new one. if I was going to by one personally I would by the mongoose cable, that's the...
  8. bigredmachine

    Misfire 2, 4, 6 and 8

    how many miles are on the truck, if your close to needing to do the t-belt might as well do it a little early
  9. bigredmachine

    Misfire 2, 4, 6 and 8

    you would have to pull the timing covers off and look at the timing marks, there is a mrak on each cam gear and one on the crank. I would expect that if the belt had jumped a tooth that you would have cam codes instead of misfire and lean codes.
  10. bigredmachine

    Crank position sensor pigtail?

    the wires are not shielded, but with the break that close to the connector itll just be easier to get a connector with a pig tail and just splice it in
  11. bigredmachine

    Techstream resulted in VSC TRAC, VSC OFF, and blinking VGRS

    if you can start to get can communication and get some codes that will start to point you in the right direction, but with no codes youll have to check everything to find the issue.
  12. bigredmachine

    Techstream resulted in VSC TRAC, VSC OFF, and blinking VGRS

    you have a can communication issue so that's not great, thats the reason your not coming up with codes is because theres no communication between systems. unless you have a good volt meter, rm, spare time and somem electrical knowledge you may want to send this out to a dealer for diag
  13. bigredmachine

    Techstream resulted in VSC TRAC, VSC OFF, and blinking VGRS

    techstream 12.20.024 is pretty outdated current version is 13.30.018. are you running the mongoose techstream light cable?
  14. bigredmachine

    Element LED off road lights - any experience?

    I took a chance on them and ordered the the amber cannon spots to replace the tired aux lights I have on the truck now. ill fill in more when I get them installed https://www.element-led.com/products/amber-cannon-led-spotlight-pair
  15. bigredmachine

    Techstream resulted in VSC TRAC, VSC OFF, and blinking VGRS

    so those are the system requirements right off of tis on the techstream page, no mention of using a mac so id try to load it onto a windows laptop and try again
  16. bigredmachine

    Engine puffs smoke

    maybe its turning itself into a steam engine :meh:
  17. bigredmachine

    Techstream resulted in VSC TRAC, VSC OFF, and blinking VGRS

    doa can bus check, that is available under the main menu and will show if you have communication between the different computer systems
  18. bigredmachine

    Techstream resulted in VSC TRAC, VSC OFF, and blinking VGRS

    that shouldn't affect anything, I plug in and remove the scantool key on key off it dosnt matter. I see your running techstream on a mac, we use windows computers at work so maybe that could be an issue? also it is highly unlikely that the tire sensors are causing any of these issues so I...
  19. bigredmachine

    Techstream resulted in VSC TRAC, VSC OFF, and blinking VGRS

    yes the link for the matainence kit s what I was referring to, we just call it a fit kit at work. you get the nut that secures the sensor into the rim as well as the metal washer that goes between the nut and rim. you may not need them but I f the sensors are corroded you may not be able to...
  20. bigredmachine

    Techstream resulted in VSC TRAC, VSC OFF, and blinking VGRS

    I did see that in the sig line, and usually having to have the vehicle run for certain systems is usually more on older vehicles. id also looking at getting a new fit kit for the sensors, its only an extra 10/sensor and youll get new nut, washer for the nut and a new rubber grommet for the...
Top Bottom