Search results

  1. hodag

    Wanted TH350 to '84 split case adapter

    Looking for a TH350 to '84 split case adapter. I'm in Omaha, NE.
  2. hodag

    5.3LS cam swap options?

    I'm doing a mild rebuild on a 2005 5.3LS before I drop it in my '78 FJ40. I'm planning on a new cam, and am leaning toward one of the Elgin "sloppy stage II" cams that can be had on the cheap. Has anyone used one of these cams? They offer about 3 different grinds, all with differing...
  3. hodag

    Leafspring lengths FJ40 vs FJ60 for SOA

    I'm working on collecting parts for an SOA on my '78 FJ40. The current springs on the 40 look like a collection of mismatched springs from other vehicles put together by a blind man with his feet. I have access to a full set of stock '84 FJ60 springs that are in good condition. I know that the...
  4. hodag

    Removing tub...is cross-bracing needed?

    I'm getting ready to pull the tub off the frame on my '78 FJ40. I have the stock roll bar out of it too. My question: Should I cross-brace the tub before removing it since the cage is out? Or is it stiff enough to stay straight?
  5. hodag

    FJ60 steering with flipped FJ60 springs (78 FJ40)

    I posted this in the FJ40/FJ55 forum but got no feedback. Maybe it'll work here. I'm working on my '78 FJ40. Laying out power steering. I have an '84 FJ60 steering box. I'm planning on a SOA using flipped FJ60 springs. Am I going to run into fitment issues? I'm assuming I'll need to relocate...
  6. hodag

    FJ60 power steering with flipped FJ60 springs.

    I'm working on my '78 FJ40. Laying out power steering. I have an '84 FJ60 steering box. I'm planning on a SOA using flipped FJ60 springs. Am I going to run into fitment issues? I'm assuming I'll need to relocate shock towers (F250?). If the towers are moved forward with the spring flip, will...
  7. hodag

    For Sale SOR headers for FJ40 with SBC

    Set of used Spector Off Road headers for an FJ40 with a small block Chevy. These are the ones that go over the stock steering box and through the lower edge of the inner fender. I have no use for them since my LS swap. They're in Omaha, NE. 68132 Buyer pays shipping. $25 OBO
  8. hodag

    Wanted TH350 to '84 FJ60 transfer case adapter

    Looking for the adapter to go from a TH350 to an '84 FJ60 transfer case. Im in Omaha, NE 68132
  9. hodag

    Wanted TH350 to split-case adapter

    Looking for the adapter to go from TH350 to an '84 FJ60 t-case. Anyone have one theyre not using?
  10. hodag

    Wanted I need one poly body mount (preferably SOR)

    Does anyone have a spare polyurethane body mount laying around? I put on a full set of SOR mounts about 10 years ago. Im in the process of replacing my rear sill, and one of my mounts completely disintegrated when I pulled it out of the rear crossmember. It doesn't necessarily need to be an...
  11. hodag

    New rear sill/crossmember. POR15??

    I have cut out my basically non-existent rear crossmember and sill. I built a new crossmember out of 2"x2" square stock. I cut out holes where the body mounts go, but other than that it is a continuous tube. I want to treat it before putting it back in permanently. I was planning on using POR15...
  12. hodag

    Wanted TH350 to '84 splitcase adapter.

    Anyone have the adapter to put a splitcase ('84 FJ60) on a TH350? Im in Omaha, NE. 68132
  13. hodag

    For Sale '84 2F (208K miles)

    I have parted out an '84 FJ60 and all that's left is the motor. It has 208,000 miles, but condition is unknown (I bought it non-running). It has oil in it, for what its worth. Its been de-smogged and is missing the side plate, other than that it is complete. I'm located in Omaha Nebraska if you...
  14. hodag

    FJ60 Man-A-Fre header on a FJ40?

    Im parting out an '84 FJ60 with a Man-A-Fre 2F header. I have a local buddy with an '81 FJ40 who wants it, if it fits. Does anyone know how much fitment differences there are? Would it be worth it to lightly modify it if necessary?
  15. hodag

    Wanted SBC to Landcruiser 4spd bellhousing

    I need the adapter to put an '84 FJ60 4spd onto my SBC. Thanks
  16. hodag

    Weight for a 2F long block?

    Does anyone know the approximate weight for a '84 2F long block. No accessories, intake or exhaust. Just the block, head, valve cover, oil pan. I need to ship one, and I need a weight to give to Fastenal. Thanks.
  17. hodag

    For Sale 1984 FJ60 front fenders

    1 pair of '84 FJ60 fenders. Tan color, no rust. No marker lights. Inner fenders are also available. $80 apiece or $150 for the pair + shipping from 68132 (Omaha,NE) $40 each for the inner fenders. Pics available on request.
  18. hodag

    For Sale 1984 FJ60 doors

    Full set of '84 FJ60 doors (no interior panels). Good glass in all four. Dent in rear drivers side that may be able to be pushed out (I'll try). Tan in color, very little rust, no holes. Pics available on request. $60 apiece, or full set for $200. You pay shipping. They are located in Omaha, NE...
  19. hodag

    Parting Out 1984 FJ60

    Parting out complete truck minus the axles, tranny, t-case and power steering box (those are going in my FJ40). Everything else is available. Complete 2F (non running when I bought it, 208K miles, condition unknown). Good interior with SOR seat covers (small tear in drivers). Dash good (small...
  20. hodag

    Out with the 3spd, in with a 4spd. Need some measurements.

    I am in the process of re-building my '78 FJ40. The PO put in a 400 SBC with an earlier LC 3spd. I am keeping the V8, and putting in a 4spd out of an '84 FJ60 along with the t-case, axles, and power steering. My questions concern the current placement of the SBC V8. To me it seems currently to...
Top Bottom