Search results

  1. PurpleFJ62

    Builds Cummins R2.8 H151 Swap into 1993 FZJ80

    Hello Mud, I bet that title got your attention, I have been working on this swap for about 6 months at this point. To keep it brief, the goal was to design a system to allow the installation of the Cummins R2.8 crate engine into an FZJ80 Chassis that required absolutely no cutting or welding on...
  2. PurpleFJ62

    Wanted 1993 FZJ80 Grey Dash Pad

    Hey, Looking for a virgin grey dash pad for a 1993 FZJ80. Does anyone have one available? Contact via nframe@umich.edu Cheers
  3. PurpleFJ62

    Wanted 1993 FZJ80 Grey Interior Parts

    Hello Mud, Looking for the following grey leather interior parts for my 1993 Land Cruiser. Only interested in clean unmodified virgin parts. Front half carpet set, for front and second row seats Dashboard pad w/o any cracks, stickers, etc. Trim panel beneath steering column (pictured below)...
  4. PurpleFJ62

    For Sale Mitsu/DSM 4G63 Turbo Engine

    This engine is from my very first go fast project car. Car is history but the engine is in very good condition, not even broken in yet. JE forged (0.020 oversized) pistons and eagle H-beam rods. Arp main/head studs with cometic HG. Performance cast iron turbo headed with 16G mitsu turbo, turbo...
  5. PurpleFJ62

    For Sale 1992 Mini truck R150f with t-case

    I have a 1992 R150f with t-case attached removed from a running 1992 Toyota Pickup with 3.0 3VZ-E engine. Had 250k miles on it at time of removal. No complete vehicle history. Shafts turn with ease, spent some time outside, been stored inside for last 2 years. Price 100 u.s.d. plus shipping...
  6. PurpleFJ62

    For Sale A442F Rebuildable Core

    I have a A442F that was acting up before pulled. I have not taken it apart, no interest in getting involved with an auto trans at this point. It might be useful to someone looking for a rebuildable core or parts. I hate to see it go to waste. Bellhousing not pictured but included. Price 100...
  7. PurpleFJ62

    For Sale Complete 1FZ-FE Engine with M/T ECU

    I have complete 1fz engine from my fzj80 land cruiser. Pulled with about 215k miles. No knocking sounds but did smoke on cold start. Strong runner, numerous leeks. Vehicle bought by me at 207k miles so previous history not known. Engine was disassembled by me and 3d scanned, this is the reason...
  8. PurpleFJ62

    PurpleFJ62 gets a FZJ80, photo intensive.

    Hello Mud, after many years of dreaming and waiting the day has finally arrived, yes I got an 80 series. I knew I wanted an 80 after my experience with one with now long time friend and co-conspirator in what will become a rather interesting project. I hope to exchange picture and ideas in this...
  9. PurpleFJ62

    Foreign market wiring diagrams (1fz-fe M/T ECU)

    Good Day ih8mud, Looking for some help obtaining wiring diagrams for my newly acquired foreign market 1fz-fe M/T ECU. I believe this is out of a general market and/or Australian market fzj80 with a manual transmission. I have already obtained RM184E via an Australian website, but this only...
  10. PurpleFJ62

    Oil Pan and Oil pressure problems FJ62

    Thought there might be some interest in this story on here. My 62 has had a big oil leek for quite some time. In the winter it leeks almost no oil at all, when its hot it it leeks alot. Also, it doesent have to be running to leek. I believe the oil capacity is 9 quarts for the 3F, just after...
  11. PurpleFJ62

    Buying Foreign Toyota parts

    Here is a question for you NON-usa guys. A friend and I are trying to determine the best way to get ahold of the small parts to convert his FZJ80 to stick shift. Were talking, clutch pedal and, master cyl, hard lines, etc. This is still under the assumption we can get an h151 with...
  12. PurpleFJ62

    Anyone make an adapter kit for 1FZ to manual trans?

    Does anyone know if there is a company, like advance adapters who is making an adapter kit for a 1FZ engine to a USA manual transmission? Seems that with all the people in the 80 series nich that someone would have stepped up and made an adapter kit...for something like a NV4500 or an older GM...
  13. PurpleFJ62

    Rust prevention=Remove chrome crap...

    hey all, My old 4runner rusted out in all 4 wheel wells, directly under the chrome wheel opening trim pieces. I am not a fan of chrome, it is for cadillacs in my opinion. Anyways I decided to rip that junk off. Amazed at home much road dirt was built up in those things. Lucky enough I dident...
  14. PurpleFJ62

    I got stuck in the snow...

    Hey All, Been getting lots of snow here in michigan as of late. Just had to take a little detour on the way to the grocery store, only problem is I never made it to the store. I was at a friends farm, driving thru old corn fields and then I decided to push the envelope a little bit. Next to...
  15. PurpleFJ62

    94 4runner solid axle project

    Hey all, been working on my 4runner when i am not busy with school. I am putting in a 84-85 solid axle and i thought it would be nice to share some pictures of the progress. before. IFS Cut out no engine Frame rails Sand Blasted parts bare painted axle test fit. The cross memeber under...
  16. PurpleFJ62

    Wiper Actuator arm replacment

    hey guys, not been on mud much latley, to busy with work and s***. Land Cruiser has gotten called into winter duty since i smashed a boulder with my 4runner. The first problem was that the wipers dident work. Turns out the spline shaft that comes out of the area in front of the windshield was...
  17. PurpleFJ62

    intake manifold removal, brake booster replacment

    hey, first time poster in the 80 section. normally i am in the 60 section but i am helping a friend replace the brake booster in his fzj80. it was apparent from the get go that the intake manifold was going to have to come off. so we proceeded to do so and had one hell of a time. it appears that...
  18. PurpleFJ62

    Rear Diff Breather

    Hey, after 190,000 miles I decidied it was time to change the rear diff fluid. I did the front as well, but it went without a snag up. Just as I was about to take out the drain plug it blew out and covered me with dirty gear lube. Needless to say I was fu*king pissed off. After cleaning myself...
  19. PurpleFJ62

    Rering 3VZ-E??

    Hi all, I am talking my beater 4runner to college at the end of the month and I am concerned about the amount of oil its burning. Has been burning for awhile, but the problem seems to be growing faster and faster. Its got 190,000 miles on it and the body is trashed. Which is a good thing...
  20. PurpleFJ62

    Voltage Regulator

    Hi Cruiserheads, havent been playing with my cruiser much as of late. To busy getting the heep road worthy after breaking a U-joint. Anyways I was sitting at a stop light with my turn signal on and my volt gauge would go up and down a considerable amount with each blink. The headlights were...
Top Bottom