Search results

  1. BILT4ME

    Rocky 1994 FJ80 Project Car

    There are also lubricant compatibility charts that you can find online. Check the type of each of those greases to make sure they are compatible. Lithium grease is the most common, with polyurea being next for this type of application. These two types do not play well together. If they mix...
  2. BILT4ME

    Rocky 1994 FJ80 Project Car

    I see you did pack the Birfield with what appears to be a moly grease. Is there a reason you did not fill the entire knuckle with the moly rather than the light colored grease? I have not seen wheel bearing grease in that light color before, (usually it is green or red). As the axle rotates...
  3. BILT4ME

    Rocky 1994 FJ80 Project Car

    Yes, that's correct. However, I would not personally use a nutsert on a seat. My fat ass in a seat that I'm hoping stays attached to the body when I get in a collision needs to have something a bit larger than the hole it it going through and not relying on the thickness of the sheet metal...
  4. BILT4ME

    Rocky 1994 FJ80 Project Car

    Only choices are to grind off the head and shove it out the bottom Drill off the head and shove it out the bottom Drop the gas tank, weld the nut back to the bottom None of these are short scenarios and will still need another nut underneath that will hold, so eventually going to have to drop...
  5. BILT4ME

    Rocky 1994 FJ80 Project Car

    So the "weld nut" is broke free from the bottom of the floor pan so your bolt just spins?
  6. BILT4ME

    Rocky 1994 FJ80 Project Car

    Actually, I would remove the seat (now only 3 bolts and a wiring harness) then soak it in penetrating oil. Then CENTER PUNCH it and drill it out from the top side. If you have access to left-hand drill bits, it can sometimes catch and unscrew it while you drill. Drill it out with successively...
  7. BILT4ME

    Rocky 1994 FJ80 Project Car

    I meant that as humor. I know sometimes language barriers prevent that from coming through.
  8. BILT4ME

    Rocky 1994 FJ80 Project Car

    Use a torch and blow a hole from the inside down on top of the gas tank? It may solve ALL your problems.
  9. BILT4ME

    Rocky 1994 FJ80 Project Car

    Yes, that is the vapor canister. There should be two hoses to it. The correct fluid (per the FSM) for the power steering on these is Dexron 3 or equivalent. It should be red. If what you have in there is brown or clear, you should flush it and replace with Dexron 3. There are a few here in...
  10. BILT4ME

    Rocky 1994 FJ80 Project Car

    You need to CHECK YOUR NUTS! The bottom of the steering arm on BOTH sides. The one on the LEFT side appears to be loose. Please torque both sides (4) nuts on each side to 71 LB-FT. (or whatever N-M that equates to. This is VERY important!
  11. BILT4ME

    Rocky 1994 FJ80 Project Car

    The video is "private" and cannot be opened.
  12. BILT4ME

    Rocky 1994 FJ80 Project Car

    Looks like it's been in a collision or two!
  13. BILT4ME

    Rocky 1994 FJ80 Project Car

    Welcome! Show us all the goodness you have! You have many of the things that the USA did NOT get (but we WANT!) Good luck and ask away. There is also a Diesel section for your Diesel Engine questions. Those mostly have to come from countries other than USA.
Top Bottom