Search results

I've run into a intermittent ruff idle problem the past few days, but do to limited time i haven't had a chance to trouble shoot it yet. I'm working with a 1994 Land Cruiser. So far the problem seems to only cause the idle to drift up, and down between 650, and 475 RPM while in drive, with AC...

Well since my truck is now almost 25 years old, i thought it was high time for some fresh springs. Since i didn't want to install a lift kit, and all the extra work that comes along with doing a lift, i went with stock height springs. Even going with OME factory stock height springs, they still...

First off this is not my truck, found it on Craig's list so don't contact me with questions. Rust free Arizona only truck with 151000 miles. Located in Phoenix Arizona (602) 570-4029 If you are from out of state, and would like me to look at this truck to do a pre buy inspection, PM me. 1994...

This is not my item so don't contact me, i saw this on a craigs list ad. Call (928) 358-3897 item is located in Payson Arizona. Cost $375.00

I, like most Mud members have wanted to get my spare tire out from underneath my truck since i bought it, in order to gain more ground clearance. With the summer camping season coming up i wanted to buy a bolt on spare tire carrier, but i didn't want to wait months to take delivery, so i built...

This is not my truck so don't contact me, i saw this on craigs list, and though a Mub member might want a clean, low mile, rust free, one owner, Arizona truck. $9700.00 * UPDATE (8-27-17) i see that this owner has posted another ad for this truck with a lower price of $9500.00, so it looks like...

The Vin tag on the door of my Land Cruiser says it was built in March of 1994. What month did Toyota stop production of the 1994 Land Cruisers made for the American market, and start making the 1995 model. Was it in August, or September of 1994, or was it a different month?

I Went to the store the other day, and as i was pulling out of the parking lot i noticed my engine RPM's floating up and down. Next, i noticed as i pulled up to the stop light the motor wanted to die, and got worse with the AC turned on. When i turned the AC off, it seemed to make the motor...

I've owned my 94 Land Cruiser going on 2 1/2 years, and during all that time it has taken my wife, and i everywhere we wanted to go. We would do 1, or 2 day camping trips in the cool winter months all over the desert southwest. There are some really cool places to check out in the desert when...

First this is NOT my part, it.s a local ad i saw on craigs list. Call the phone number listed in the ad if you have any questions, do NOT CONTACT ME. I have a used toyota landcruiser trd super charger for sale. Latest generation trd sc, before being discontinued by trd for the 80 series 95-97...

Here are some photos of my new roof rack. I know, i know, most members can't wait to rip their factory roof racks off, and throw them in the trash. I've read all the threads about how they are junk, and the nut rivets that mount them can have rust issues. For me, i just can't afford to throw...

I saw this ad on my local Craig's list, and thought other Mud members may find some parts they need, I'm not the seller, so please DON'T contact me. The ad says they have the PTO winch along with cable lockers. TEXT (480) 395-5734 RARE HJ61 TOYOTA TURBO DIESEL PARTS AVAILABLE PTO WINCH LOCKERS

Today i was going to do the 7 pin mod on my truck. After opening up my dash, i came across an old car alarm that the PO never told me about. So since i was already there, i made up my mind to remove that alarm before it starts giving me problems. While removing it, i opened my hood (this turned...

I just installed some new tires on my truck. They have a very open mud style tread, the price for them was very reasonable. Since the spare tire on my truck was the original Bridgestone from 1994, i bought 5 tires. They were LT265/75/16R load range E. The cost for all 5 tires ($805) with...

I just wanted to share some photos of my hidden winch install. I bought a used Ramsey Pro 9000 winch off of Craigs List for 200 bucks. I then spent the better part of a month doing the install.

I posted a few days ago that I'm helping a friend replace all the bearings and seals in his front axle. Another member PM me a link on how he had his CV joints machined so he could grease them without taking the axle apart. I looked over the link he sent me, and we made up our minds to do this...

I'm helping a friend do a rebuild on his front axle. Anyway we've got everything apart, and were cleaning all the parts today getting them ready to reassemble. Well what we found when we took the inner birfield joints apart to clean them, on one joint we were able to move the cage around by hand...

I'm getting ready to help a friend this coming weekend replace the inter axle oil seals, bearings, and so on, on his 96 LC. Anyway, he was told by his "Toyota expert", that since his truck came with factory diff locks, that they must be locked in first, before we remove the axle shafts. I looked...

I've got a 1994 Land cruise, and I've spent time on the web looking at sites like Helm's, who is the OEM printer for the factory service manuals for Toyota. Plus I've also looked at other sites on the web that sell used Toyota service manuals for a body book for my truck. The reason i ask, is...

I'm looking for a complete rebuild kit for the front axle on my truck. I found a kit at Low Range Off Road in Utah that comes with Toyota, Koyo front wheel bearings, and Toyota, Koyo king pin bearings. Plus it comes with factory Toyota inner axle seals. This is a complete kit with everything...