I just finished adjusting my headlights - but never saw this light turn on - and can not find it mentioned in my factory manual or owner's manual.
What is it? When does it turn on? And how do you remove it to replace the bulb - it does not seem to twist out - does it pull out?
My AC button has been unreliable for the last 5 years - and this week - stopped working all together with the AC turned off. This renders it kind of useless for going to the desert, so I had to find a fix. Some of the other buttons were also getting iffy.
I saw a thread
How to remove...
I'm thinking it would be possible "the technology exists" to have a slide out bed platform - that would come out of the back tailgate - be supported by the tailgate/rear floor on one end - and by some legs (approximately 2' long) on the other end. Then have a tent that would enclose it with an...
I have my radiator out, and was wondering if it is much of a hassle to replace the fan bracket and fan clutch.
Another option is let a mechanic do it when I have the timing belt serviced in a few months. But if it isn't too much trouble, I might do it myself and learn something and save a...
I'm interested in removing the front differential myself so I can have a shop put a locker in it, save some $ by bringing it in. How difficult a job is it? (I can't find a diy thread - do you know of one?) Also, any suggestions on a shop for the bench work?
I replaced the timing belt, water pump, pulleys and tensioner 9 years and 65,000 miles ago. I figure because of the time past, it is probably time to replace the timing belt and water pump. I'm inclined to leave the pulleys and tensioner alone - any advice?
I'm thinking of removing my hood to paint it rather than tape it off, but was wondering if anyone had done so and had any advice. (If it is a big hassle I'll just tape it off to paint.) It looks simple - but sometimes things are more difficult than they appear!
I bought this at Costco, around a hundred bucks. I was thinking of more sophisticated installations, but have found that this is working for me, so I'm just living with it as is, and thought I'd share. I installed the camera in the standard way, bringing the wire to the Driver's side...
Removed passenger side seat of second row. (Had to cut carpet a bit to remove forward bolt of the seat bracket.)
Installed the passenger side seat of the third row. This created a "limo" seat - the most popular seat in the truck. The "middle" seat of the second row was the least...
Bringing the family for a Colorado road trip end of July - will tent camp for most of a week. A couple of folks in our group don't sleep well much above 6,000 ft - I know everything in Colorado is pretty high - any camping suggestions???
I am just this side of breaking something - I've poked, twisted, prodded, pulled on these black nubs that hold the speaker grill in place (I want to replace the speaker cloth), but can't figure out how to get them out!
Once i get my second battery in - i'll be wiring up some extra power connectors to run things from. I hate the old cigarette lighter plugs - anyone suggest any other replacements? i recall something called a BMW plug sometime in the past which is similar.
I've used this a half dozen nights by now, and have found it perfectly usable, despite of its very simple construction.
It uses a single 4x8 sheet of plywood - cut to: 48" x 76". The edges are taped with duct tape, and the end that goes against the seat have a strip of camping foam hot glued...
I've taken my '99 through Death Valley, backroads of Southern Arizona, Utah and California - and quite frankly, have found that my stock LC does it all without a wimper, shutter, or slip. So am I missing something?
The only mod that makes much sense to me is a steel bumper i might want to...
Thought I'd share some of my experiences, perhaps for those with more experience to remember when they were as supid as me, and for others to learn from my mistakes and what went well.
The job: give my LC a mullet: the roof, hood, and front bumper. The clear coat has failed on all three...
My LC has about 6 square inches on the hood and on the roof that has worn down to primer. I have had good luck with my HVLP sprayer and I'm thinking of painting it myself. My color code is 1c3 (river green mica that looks grey to most eyes.) My quesitons:
1. Do I prime the whole car?
I found a 1.5" long crack between the tread of my tire (6/32 remaining - about 4 years old since it was made/3 years on truck). It looks kind of deep - goes lengthwise around the tire. Some web surfing suggests this "happens to Michelin more than other brands."
Anyone else have the same...