Search results

  1. sambudo

    Horn question the spring inside the steering wheel

    Can you buy this spring, if so where and wat does the bottom metal piece look like? I think mine might be warn out. It keeps falling inside. Does anyone have pictures what is supposed to look like? And does anyone know where to purchase from.
  2. sambudo

    Fuse box fuse melting issues

    What is the H4 upgrade ? The fuse panel was brand new along with the wiring harness. Not sure about the head lights. If they have been upgraded or not. The volt meter read 14.8v. What fuses do you all use? I bought the cheap Bussmann from the parts store. Is there a stronger one available...
  3. sambudo

    Fuse box fuse melting issues

    Recently replaced wiring harness with the coolerman s harness Wiring harness. Question. having trouble with the fuses melting getting too hot. Mostly just the one for the lights the first location. The fuse melts and solder drips out of it. What could be causing this problem. WHat is the...
  4. sambudo

    Brake/Hazard/Turn Signal Wiring Issues

    Thats great news! Congratulations on your success!
  5. sambudo

    Brake/Hazard/Turn Signal Wiring Issues

    Thank you Mark and thebigredrocker. Much appreciated!
  6. sambudo

    Brake/Hazard/Turn Signal Wiring Issues

    Can anyone help on this?
  7. sambudo

    Brake/Hazard/Turn Signal Wiring Issues

    Has anyone talked to Coolerman? I hope he is doing ok. I have reached out to him but haven't heard from him. Maybe he's out of town. I hope he is doing well. Thanks
  8. sambudo

    Brake/Hazard/Turn Signal Wiring Issues

    https://forum.ih8mud.com/members/coolerman.2392/ Mark can you please give us your thoughts on this? If you could call David 503-502-9859 to discuss possible issues. Dave is installing the harness for me and we are on the last circuit. Need to have your recommendations please. Thank you, Scott
  9. sambudo

    Brake/Hazard/Turn Signal Wiring Issues

    Anyone ever have this issue before?
  10. sambudo

    Brake/Hazard/Turn Signal Wiring Issues

    @kevos37
  11. sambudo

    Brake/Hazard/Turn Signal Wiring Issues

    @Kevo
  12. sambudo

    Looking for these parts 1971 fj40 any suggestions

    Same for the clips or did you re use them? This looks nice.
  13. sambudo

    Looking for these parts 1971 fj40 any suggestions

    A few parts I am looking for can any one help and point me in the right direction of who might offer these hard to find parts? Light switch Wiper switch Parking brake switch that goes on back of parking brake lever Dome light switch on dash Courtesy light right of glove box Shifter gasket boot...
  14. sambudo

    ISO 1971 parking brake drum

    yep, it has a worn out shaft bearing and a loose ebrake parts. And seemed that somewhere along the line some yahoo over tightened the ebrake cable.
  15. sambudo

    ISO 1971 parking brake drum

    Could you take a side shot of this? Thanks
  16. sambudo

    ISO 1971 parking brake drum

    what do you want for it? Could you send me pictures? Is the hub in better shape then mine? Thank you
  17. sambudo

    ISO 1971 parking brake drum

    Would that fit a 71? Where in Washington are you?
  18. sambudo

    ISO 1971 parking brake drum

    I have no idea what cause this groove, still investigating it
  19. sambudo

    SM465 conversion

    Could someone tell me what is required to do a SM465 conversion? Currently have 1971 3spd. Was considering to do 4spd conversion. But the shafts are different and now probably need transfer case to match. So now I think the sm465 is a better option. But not knowing exactly what it entails...
  20. sambudo

    ISO 1971 parking brake drum

    1971 fj40 3spd. Any idea where I can get my hands on a new or used one of these parking brake drums with the spline?
Top Bottom