Search results

  1. Cruisin'

    For Sale: 1HD-T Parts

    I've decided to part the 1HD-T out. Here's a list of parts available, with prices. Head - SOLD Injectors - SOLD Turbo: SOLD Intake Manifold: SOLD Crank: $400 Injection Pump: SOLD Power Steering Pump: $200 Piston Cooling Jets: SOLD Flex Plate: $100 Vacuum Pump: $200 Timing Gear/oil pump: SOLD...
  2. Cruisin'

    For Sale 1HD-T Rebuild project

    ***EDIT April 18. Not much left. I've moved the remaining parts to the top of the list.*** I've decided to part the engine out. Here's a list of parts available, with prices in $CAD. Figure about 30% less for $USD Crank: $400 Pistons and rods: $75 each Torque converter, flex plate...
  3. Cruisin'

    BJ74 Auto in the Fraser Valley

    Does anyone in the Fraser Valley area have an auto BJ74 that I could do some measuring on? I have someone wanting skid plates for an auto, and I need to measure up the frame and clearance to the t-case to I can design and build these. All the trucks I can think of are all 5-speeds. Any help...
  4. Cruisin'

    For Sale 100 Series Ironman4x4 Protector Bumper - Canada

    I have a Protector winch bumper for the 100 Series/LX470 that was shipped to my shop by accident. I would really rather sell it than send it back. http://www.ironman4x4.com/products/protector/bullbars/landcruiser-100-series-ifs-protector-bull-bar This is in Canada, and for this sale its...
  5. Cruisin'

    FS: 40 Series Rolling Chassis

    I have a rolling chassis for a 40 Series that I'm selling. It is the frame my project truck came on. I was after the body and engine/tranny, so the frame and axles need to go. The frame is basically rust free. There is a little surface rust, but no bubbling at all. Even the back is totally...
  6. Cruisin'

    Ironman 4x4 100 Series winch bumper ON SALE

    I was accidentally shipped a Protector winch bumper for a 100 Series. I would way rather sell it than send it back, so I'm putting it on sale for $1300. Normally retails for $1480. This is a really sharp unit, with a charcoal powder coat finish on the bottom, and polished stainless upper...
  7. Cruisin'

    Near incident on Mt Cheam road.

    We had near incident yesterday. I thought I'd share it since there might be something to be learned from what we had done right, and what we learned that might make a challenging situation go better. I actually was thinking of Sass through parts of this, and am very grateful for how my...
  8. Cruisin'

    Ironman4x4 10% off Christmas Sale at Cruisin Off Road

    Its not too late for some last minute Christmas shopping!!! I've got some great gift ideas from Ironman 4x4. All these parts are in stock and are 10% off until Christmas. (***Local pickup only as I can't guarantee it will be there before Christmas. Sale prices still apply if you need it shipped...
  9. Cruisin'

    Mud Ship: M101 CDN from Calgary to Chilliwack

    I have a guy who wants me to do a couple things to his M101, and it needs to get from Calgary to Chilliwack. If anyone is doing that trip in the next month or so, and wouldn't mind pulling a little trailer behind we'd appreciate the help. Naturally we'll make it worth the trouble too! Please...
  10. Cruisin'

    For Sale 80 Series 1HD-T water/air Intercooler

    I have a water to air intercooler for sale to fit a 1HD-T 80 Series. Includes all the plumbing, electrical, and mounting brackets. Also includes Isspro pyro and boost gauges. And a LHD A-Pillar pod. $850 takes the works. Located in Chilliwack, BC Canada. Local sales only please. PM me or...
  11. Cruisin'

    FS: 1HD-T Intercooler

    I have a water to air intercooler for sale to fit a 1HD-T 80 Series. Includes all the plumbing, electrical, and mounting brackets. Also includes Isspro pyro and boost gauges. And a LHD A-Pillar pod. $850 takes the works. PM me or email cruisinoffroad (at) shaw (dot) ca
  12. Cruisin'

    FS: 80 Series front bumper, intercooler, roof box

    I have a few things around the shop that I'd like to see gone. There's a Cruisin Off Road front bumper for 80 Series. This is a scratch & dent sale. It has a couple minor blemishes that weren't noticed until after powder coat. Nothing that will affect fit or performance. $850 (reg $1000)...
  13. Cruisin'

    Ironman 4x4 accessories Blowout

    I've got some Ironman 4x4 accessories and suspension parts that I'm blowing out. Check out the list and prices: 5' x 7' awnings: $190 30L Fridge: $650 Small Recovery Kit: $115 Flo Max Compressor: $135 Flo Max Pro Compressor: $218 LED Square lights: $50 10" LED Light Bar: $150 20" LED...
  14. Cruisin'

    Wheeling Jan 11 - BC4WD Hale Creek Maint Run

    I'm leading the BC4WD Harrison West/Hale Creek maintenance run this Saturday. It would be great to have a few CC guys along! Its the usual routine: Meet at the Sasquatch Inn at 9:30, pull out at 10am. We'll hit Florence Lk on the way by, then up to the Hale shelter for lunch, and hopefully...
  15. Cruisin'

    Cruisin Off Road Ironman Snorkel Sale!!!

    I have a bunch of stock of Ironman 4x4 snorkels for 80 series, and I'm putting them on sale through to the end of January. $250 + Tax. Give your truck the gift of clean, cool air this Christmas! Save yourself the anguish of cutting a 3" hole in your fender and have me install it for only...
  16. Cruisin'

    FS BJ70/73/74 rear tube bumper

    I had a customer cancel an order, and have a tube bumper with dual swingouts available for a 7* Series truck. Its got the tire on the right, and a jerry can holder on the left. Receiver suitable for small/medium towing (really all you can tow with these things anyhow). Tube wraps the corners...
  17. Cruisin'

    80 Series Transmission Skid Plate

    I've developed a skid plate for the 80 series transmission. Its cut and formed out of 3/16" steel plate, and bolts on to factory threaded holes in the frame and cross member. Fits all models from 1991 - 1997 (even the Lexus!!!). Comes powder coated (two coats), and includes mounting...
  18. Cruisin'

    Ironman 4x4 accessories - Father's Day is coming!

    I've got some new wheeling/camping accessories in. Father's Day is coming, so start dropping hints! You can check out the full album here: Facebook - Ironman 4x4 album Tire deflators and LED Light Bars are new, just got them in last week. I have some stock in the stuff shown on the...
  19. Cruisin'

    Mud ship - Radd Cruisers to Abby/Chilliwack

    I have a small box of parts for my truck waiting at Radd Cruisers. If anyone is passing by there, and then coming to the mainland in the next week or so would they mind bringing them over for me? I'm in Chilliwack, but if the parts were dropped off somewhere in Abbotsford that would work for...
  20. Cruisin'

    BJ74 EXO/Boat Rack

    I'm doing a project for a guy who wanted to be able to put his 12' aluminum fishing boat on the roof to access small fishing lakes instead of dragging it around on a trailer. We didn't want to have a rack relying only on the roof gutters, so its going to be a full length rack mounted to the...
Top Bottom