Search results

  1. M

    94LC Failed CA smog no EGR vacuum when revving.

    Hi Folks, 241K miles now. Prior to test: Replaced cats last month. It was clogged and heating up the floor pretty bad. Disabled Pair valve which was the cause of my Code 25 and 26. Stuck and corroded valve. New O2's New egr temp sensor Dorman VSV AC Delco charcoal canister Morning of test I...
  2. M

    My crankshaft pulley goes shaky shaky...

    Crankshaft pulley a wobbles a bit. Got it with 234K miles when I bought it last year. No leaks but since CS pulley is off I decided to replace the CS seal and oil pump gasket plus it's a good learning experience. I welded (2) short 1/4" flat bars to a long piece of 1/2" bar for a tool to hold...
  3. M

    94 LC got stranded, fuel system issue.

    Hi Folks, 94 LC 237,000 miles. Got towed on a flatbed back home. At start truck will run for a second then immediately die right after. Verified spark with timing light. Checked all fuses > passed. Checked all the relays: EFI, CO(circuit opening), FP(fuel pump) > passed. Checked FP resistor >...
  4. M

    Roof rack gutter mount install.

    Hello... was thinking of making some custom gutter mounts for a roof rack. Looks like the PO had installed one already based on the wear marks and one deeply gouged area. The material doesn't look like paint, it's very thick and has a crumbly texture. Should I refill that worn area with bondo...
  5. M

    94 Land Cruiser automatic transmission(A442F) filter bolt torque.

    Hello. Can't find the specs for the transmission filter torque. In Haynes all it says is transmission oil pan to 61 in lbs. No mention of the filter torque. Chiltons says "Inspect, clean or replace the transmission filter or strainer at this time, if necessary. If the filter is removed, be...
Top Bottom