Looking for a bit of assistance. I've lost 2nd gear in my H55F in my BJ74 and plan to swap the transmission out this winter. I've only really worked with 40 series stuff so looking forward to messing with the BJ74.
Question is how tricky is it to remove the transmission? Is there a transmission...
1978 HJ45 with Toyotas H Diesel engine
Legal import from Australia with clean CO title in my name.
Lowered price to 15,000
Right hand drive h41 4 speed
Toyota PTO winch. Has dual output on T-case if you wanted to run something else off of that.
Very new 33x12.5 mud tires with new white...
I'm heading to Calgary from the Denver area with an empty 18' trailer leaving Denver the afternoon of 5/11. If you need something moved heading north and along my route of I25 to I90 into billings then north eventually to I15 and up to Calgary let me know.
I have an fj40 cut and turned axle housing with ruff stuff specialties spring over perches welded on and ready to go. I believe it has right about an 8 degree turn. This should make the third member up and out of the way and pointed straight at the t-case.
I can get a photo saturday and...
I'm in need of the oil line from the oil pump to the rocker for an F engine.
It's a little copper line with screw fittings on both ends. The lower fitting is on the passenger side under the side cover and the upper fitting connects to the middle of the valve rocker. See photos...
Im in need of the lower thermostat housing for an F engine. Mine is a '73 but I believe all later F's should work.
Also, I need the frame engine mounts for the same '73 F engine. (metal riveted on ones) The '64 FJ45 I plan on fixing up has a V8 in it now but want to bring it back closer to...
I'm looking for a late 60's to early 70's windshield frame. I need the version with the wipers on the top of the frame. I'm only in need of the frame, but if it has the glass that will work as well.
I'm located in Lafayette, CO. 80026
Please PM me or reply to this post so we may work out...
I'm in need of a 3 speed drive shaft from i believe the later years of the 3 speed production, '72,'73. I think the dimensions are 2.25x2.55 and a 10 mm bolt hole
It doesn't need to be in good shape at all. I'm mainly after the flanges and plan a complete rebuild.
If you happen to have one...
Looking for a rebuildable or even better in useable condition 3 speed Transfer case.
Im in central WY (casper) but travel often to Colorado front range areas. Please let me know what you have.
THANKS FOR LOOKING
What should I do with my new (to me) '66 SWB 45.
I'm now a single man, with lots of time but not much money.
I'm not sure what I want to do with it, I have a FJ40 that is built up but would like to change a few things. I have always wanted a 45 and finally found one that was close to home, good...
My project: '72 FJ40 with FJ60 axles, Rear 4 link and SOA front. Still running the good old F engine, stock t-case but have swapped in a SM420 transmission. 4.88 R&P, Lockright front, ausi locker rear. When the front axle is finally under the truck it will have a well needed set...