Search results

  1. garrettpsu

    1991 Prado 4WD not engaging

    Thanks for the good feedback and info. I'll start digging into it. But sounds like getting manual hubs on that truck is the best upgrade right now. My favorite truck in our training fleet, so I was bummed when it went off-line last week. Thanks again -
  2. garrettpsu

    1991 Prado 4WD not engaging

    My 1991 Prado has the electronic hubs and 4 HI selectors to the right of the steering wheel (RHD truck). I know about the vacuum solenoids under the hood, but is there also one on the T case? Truck would occasionally go into low, but now it won't go into low and/or 4 wheel drive at all. You...
  3. garrettpsu

    For Sale  Superwinch Talon 9500 ISR winch

    I have a new (box opened) Superwinch Talon 9500 ISR winch for sale. Integrated solenoid with synthetic line. I'm located in Middleburg, VA - about an hour west of DC in western Loudoun County. I will not ship this. Happy to deliver to Leesburg, Arlington/Alexandria area. They sell new for about...
  4. garrettpsu

    1992 LJ76 electric window motor

    Thank you. I'll make sure that looks the same as mine/has same connection. I have a RHD truck and it's the RH/drivers side, so I'll just make sure I get the correct side.
  5. garrettpsu

    1989 LJ73 External Voltage Regulator

    I was able to get one from Advance the next day. :) Just matched up the plug in the pic. Same for my Hilux - just a different harness.
  6. garrettpsu

    1992 LJ76 electric window motor

    It is a 12v JDM truck.
  7. garrettpsu

    1992 LJ76 electric window motor

    Do the Prado's (1991) front electric window motor cross with a CONUS truck? Thank you in advance.
  8. garrettpsu

    1989 LJ73 External Voltage Regulator

    My 1988 seems to have the same need, but slightly different looking. Same plug it appears. I'm going to try the local Toyota dealer with the numbers posted above. Crossing fingers.
  9. garrettpsu

    1990 Surf 2.4 D with intermittent no power, but idles.

    We haven't done anything to it. Ran fine for a day and then it starting doing this - pretty much what you are saying. This could be a good start. Thank you.
  10. garrettpsu

    1990 Surf 2.4 D with intermittent no power, but idles.

    The cable moves good on top of the pump all the way to the pedal. Action looks good, etc. I could have a closer look at the solenoid though. Thank you.
  11. garrettpsu

    1990 Surf 2.4 D with intermittent no power, but idles.

    My initial thought was injector pump. Fuel looks good in the truck as I took a sample from the separator. But it honestly "feels" like a fuel issue as it's intermittent. But I think I'll start with filters as those are the easiest/cheapest.
  12. garrettpsu

    1990 Surf 2.4 D with intermittent no power, but idles.

    Yes. Sorry, 2LTE motor. I believe it was moved. :) Was posting via my phone and I suck at that.
  13. garrettpsu

    1990 Surf 2.4 D with intermittent no power, but idles.

    Wondering if this is just an injector(s) issue, but as the title says - one minute the truck has power/acceleration and and next it will only just idle. Truck stays running, but under full throttle, nothing. I don't have a ton of experience with these motors, so looking for some starting...
  14. garrettpsu

    '86 Bundera proportioning valve

    Here's a better pic of the Prado and Bundera. They have both been a little upgraded since these pics.
  15. garrettpsu

    '86 Bundera proportioning valve

    I'll reach out to him. I am always looking for parts sources for my 2LT/LTE and 3L motor trucks. Thank you -
  16. garrettpsu

    '86 Bundera proportioning valve

    That's my Prado behind it, along with quite a few other Toyota's. I operate a military/fed driver training school - everything from defensive/evasive to off-road. The Bundera is in need of a little love right now. Need a brake booster too. ha
  17. garrettpsu

    '86 Bundera proportioning valve

    I think my valve is bad and pulling air in and/or the valve inside has failed. Is there a Toyota valve from a US model that it crosses with in terms of a part#, etc? Thank you in advance.
  18. garrettpsu

    '91 Hilux JDM 2.8 diesel - inertia switch/fuel cutoff

    Great. Thank you for the info. Good to know for sure. It is the 3L.
  19. garrettpsu

    '91 Hilux JDM 2.8 diesel - inertia switch/fuel cutoff

    Do these motors have inertia switches? This truck suffered a light roll over and was running for about 45 seconds before it was able to be shut off/stopped running. The motor is spinning over, but will not start. Before we get into other options, I was wondering if there is a fuel shut off...
Top Bottom