Search results

  1. YotaJosh

    Throwing parts at a 60 build thread. Now Featuring V8 swap

    100% yes. I still have a few minor things to work out, but I'd jump in it and drive cross country tomorrow if I needed to.
  2. YotaJosh

    Throwing parts at a 60 build thread. Now Featuring V8 swap

    Yes, used the same GM hot rod pan. I wish I raised my motor a bit more in the engine bay and moved it back a bit, but I chose not to because I was reusing shortened driveshafts and wanted to keep the tcase in the same place as the previous motor swap did. Now that my swap is done and has all the...
  3. YotaJosh

    Throwing parts at a 60 build thread. Now Featuring V8 swap

    I never got my tach working. Never could find a reliable, tried-and-true writeup about using the OEM one. Most people give up and swap it to a newer, aftermarket one. I'll probably do that one day. For now, I know when it's idling, and the ECM does a good job of enforcing the redline. If your...
  4. YotaJosh

    Throwing parts at a 60 build thread. Now Featuring V8 swap

    Use the original Toyota sending units and all your gauges will work fine. Will need some adapters. All that has been tackled by numerous LS swap threads here on Mud. As for the 4L60E, I had some headaches using the one that came with my LS, and then with the one I snagged from a dismantler...
  5. YotaJosh

    Three 6 Hybrids is Moving Out of the Carport

    Isn't this just another carport? You can't escape them, can you?
  6. YotaJosh

    Strange Noise in Dash of '16 Sequoia

    I've owned my 08 for 5 years now and it has always "whistled" out of the vent left of the radio when you turn the fan up mid way or higher. I still haven't taken it apart to figure out why, but just attributed it to a misaligned air duct or something.
  7. YotaJosh

    60 series....Tech and Classifieds

    He recommends replacing the entire gearset (which I know is the right way), so I went ahead an ordered a 3:1 kit.
  8. YotaJosh

    60 series....Tech and Classifieds

    I tore up some parts in my split case so I'm hoping to find someone that did a 3:1 or 4:1 upgrade and shelved their stock parts. I need: Idler gear. 38mm 4 speed trans version (aka the 86-87 FJ60). Bearing race holder/retainer/donut that goes in the front half of the case. Near where the 2/4...
  9. YotaJosh

    RLC Classifieds

    I tore up some parts in my split case so I'm hoping to find someone that did a 3:1 or 4:1 upgrade and shelved their stock parts. I need: Idler gear. 38mm 4 speed trans version (aka the 86-87 FJ60). Bearing race holder/retainer/donut that goes in the front half of the case. Near where the 2/4...
  10. YotaJosh

    Wanted  FJ60 transfer case (splitcase) parts. 38mm 4 speed.

    I tore up some parts in my split case so I'm hoping to find someone that did a 3:1 or 4:1 upgrade and shelved their stock parts. I need: Idler gear. 38mm 4 speed trans version (aka the 86-87 FJ60). Bearing race holder/retainer/donut that goes in the front half of the case. Near where the 2/4...
  11. YotaJosh

    Looking for recommendations for a machine shop

    Might try Jim's in Hensley. I used them for a 20R head job, but it was around 12 years ago. https://www.google.com/search?q=Jim's+Engine+Services%2C+Philis+Drive%2C+Hensley%2C+AR
  12. YotaJosh

    Little Rock - Rigs and coffee - Monthly Meeting

    Hopefully your trail ride avoids the Winona spillway. It's rolling right now.
  13. YotaJosh

    Hello all! Quick question for anyone interested.

    @Tireguy87 needs to chime in as he sold his a while ago and the new owner has recently sold it again. I believe both sales were in the $10k to $12k range.
  14. YotaJosh

    SPOTTED! Arkansas & Surrounding Area

    Found in a copy of The Scout Guide in a waiting room. I wonder if that 40 is local to Little Rock.
  15. YotaJosh

    5.3 Vortec AC - How to correctly setup a Chevy compressor to stock 60?

    That's what I'd use.
  16. YotaJosh

    5.3 Vortec AC - How to correctly setup a Chevy compressor to stock 60?

    I didn't. Made no difference to me. Edit: There is a wire to send the signal to the TBI ECM and it will idle it up for you. I don't remember which wire exactly. Any TBI wiring diagram should detail this wire.
  17. YotaJosh

    Front drive shaft photo request, 5.3/4L60E

    Here's the specs on my Tom Woods shaft.
  18. YotaJosh

    Front drive shaft photo request, 5.3/4L60E

    My pictures are in this post: FJ60 5.7l TBI to 5.3l LS Swap - https://forum.ih8mud.com/threads/fj60-5-7l-tbi-to-5-3l-ls-swap.1000636/page-2#post-11198437 I tried to get the stock driveshaft to clear, but I didn't want to beat the trans pan anymore. Not pictured or mentioned in my thread is...
  19. YotaJosh

    SOLD FJ62 Air Cleaner

    I appreciate the offer, but I just got one yesterday.
  20. YotaJosh

    RLC Classifieds

    FJ60 rear axle. Stock open diff with 3.70 gears. Located in Little Rock. $250 OBO.
Top Bottom