Search results

  1. crikeymike

    4th of July sale

    At Exitoffroad.com it's free shipping on almost everything (Dobinsons, Dirt King, SPC, etc) on orders $500 or more. Details on the website. Ends midnight Eastern time on 7/7/21, so no excuses if you "miss the sale"!!
  2. crikeymike

    New Dobinsons VT series dual rate coils

    Hey mate. With that sort of total weight on the vehicle, I'm gonna say that a variable rate coil won't work properly for you. You'd be better off with a constant load linear rate coil. I've had some heavy dudes in the past in Latin America try the variable rate coils and once you hit a...
  3. crikeymike

    Dobinsons IMS Shocks - Land Cruiser 100 Series and Lexus LX470

    Yeah, the instructions show to point the rebound adjuster to an accessible location. You just take that off, and rotate it. I don't leave the bottom on my MRA's zip tied. The boot fits over and covers the rebound adjuster just fine, and I can pull it up to adjust rebound, although it's very...
  4. crikeymike

    What Did You Do with Your 80 This Weekend?

    That's great to hear!!
  5. crikeymike

    80 rear bumpers for sale?

    Yeah, no sooner than a week, usually takes a few days to get it packed and shipped out
  6. crikeymike

    80 rear bumpers for sale?

    These are in stock now. https://exitoffroad.com/product/dobinsons-rear-bumper-with-swing-outs-for-toyota-landcruiser-80-series/
  7. crikeymike

    Dobinsons IMS Shocks - Land Cruiser 100 Series and Lexus LX470

    https://cdn.shopify.com/s/files/1/0029/2795/1981/files/MRA59-A682_Fitting_instructions.pdf?v=1608763960 That shows all the washers and bushings. Edit: yes, you need the washer on the lower mount first, then the shock with the bushings, then the outer washer and nut. Otherwise the bushing near...
  8. crikeymike

    Dobinsons Suspension options for Sequoia 01-07 and 08+

    I've sold a few sets of them but I don't think anyone has posted a review of them yet, since a lot of people are still waiting on the coils to arrive (they're constantly sold out). No, there are no plans for a rear MRA, but there will be some for the front, since they're the same as the Tundra.
  9. crikeymike

    New Dobinsons VT series dual rate coils

    That's always been the rule. The 3"-3.5" VT coils were always listed for heavy loaded vehicles. Lighter rigs won't compress the coils as much and end up with more lift
  10. crikeymike

    Concerns on my Dobinson 3" Tapered spring lift

    Which part number though? Dobinsons have a lot of coils rated to different capacities.
  11. crikeymike

    Concerns on my Dobinson 3" Tapered spring lift

    I've reached out to Dobinsons and shared your post to them to see what feedback they have about the lift height. My initial thought is that this new version of the VT coils will take longer to settle than the old, as these are cold wound coils instead of hot, and cold wound coils always take...
  12. crikeymike

    Dobinsons IMS Shocks - Land Cruiser 100 Series and Lexus LX470

    I normally put the lipped bushing on the bottom of the shock mount with the lipped washer on top of it, then on top of the mount, the regular bushing and washer then the nut. Making sure it's centered in the mount properly. The way the washers and bushings come installed on the shocks doesn't...
  13. crikeymike

    Dobinsons IMS Monotube Shocks for 80 Series - Internal resi Monotube Shocks

    Still waiting on an ETA from production. No date at this point unfortunately
  14. crikeymike

    Dobinsons IMS Shocks - Land Cruiser 100 Series and Lexus LX470

    I wouldn't go with anything more than the C59-185's unless you're planning to add more weight than what you just listed. You can always add trim spacers to add more height to the rear if needed, but going with a super strong spring without the constant weight wouldn't give a very good ride...
  15. crikeymike

    If I Were to Start All Over Again with a Stock GX470, I Would...

    A few years back, I had a chance to buy a really nice 4th Gen V8 4Runner with everything you could want on it, but it is 10 years older than my 2014 4Runner and I just didn't want to go with that much older of a vehicle, so I passed on it, and really didn't have any regrets. Feels crazy to...
  16. crikeymike

    Dobinsons IMS Shocks - Land Cruiser 100 Series and Lexus LX470

    Yes, about 3 weeks and they'll be coming in again. We're taking backorders for them already if you haven't placed an order yet. https://exitoffroad.com/product/dobinsons-ucas-for-toyota-land-cruiser-100-series-and-lexus-lx470/
  17. crikeymike

    Dobinson Dual Swing Out Bumper - 80 Series - A+

    He's not running mud flaps so it's not an issue, but if you do run them, the edge of the bumper wing needs to tuck in behind it, so you just trim a little bit of it away to get the bumper inside. I can't find a photo of how it looks, but it's very simple. It's where I have the red circle in...
  18. crikeymike

    Dobinson Dual Swing Out Bumper - 80 Series - A+

    Clear light: black – ground/negative Brown – Turn signal positive White – Reverse light positive Red Light: Black – Ground / negative White – tail light positive Brown – Brake Light Positive
  19. crikeymike

    I am a smooth brain in need of help

    After reading it all, no thanks!! Kidding, a little. Dobinsons make 3 different types of shocks for these vehicles, as well as the coils, panhard rods, trailing arms, bushings, all the parts necessary to lift the vehicle properly and get the correct ride and performance a customer could want...
  20. crikeymike

    New Product: ARB Old Man Emu Upper Control Arms

    No, I don't. I had considered offering them, but since they're almost never in stock too, it's not worth it. I sell Dobinsons, SPC, and Dirt King UCA's.
Top Bottom