Search results

  1. M

    Full Hydro Steering on an 80 info?

    My plan is to run a toyota PS pump off of a 3.4 tacoma. I plan on mounting in down low on the passenger side where my AC compressor was. This gives me direct access to the crank pulley. I am not 100% sure what I am going to do with my stock pump yet. I may remove it or loop it, leaning...
  2. M

    Full Hydro Steering on an 80 info?

    Thanks for the links. I ordered up a trail gear setup. 8" ram. I think the hardest part is going to be building the mount for the new power steering pump. Waiting on parts to come in.
  3. M

    Full Hydro Steering on an 80 info?

    Yes Full Hydro switches the traditional steering linkage and steering box. I was trying to find out if anyone has had any luck running Full Hydro with a stock power steering pump. I have already ordered a setup and plan on mounting a belt driven power staring pump on the passenger side of the...
  4. M

    Brake pedal hard to push after turning

    If you still have rubber lines and they are old in the system they maybe your problem. They may not be allowing the fluid to return.
  5. M

    Todays wrenching

    Thats a sick setup!!
  6. M

    ||| Official YT For Sale/Trade/Wanted Thread |||

    Not mine, but a cool truck. From Japan ! Diesel 1994 Toyota Land Cruiser Prado 4x4 - cars &... - https://nh.craigslist.org/ctd/d/tyngsboro-from-japan-diesel-1994-toyota/7316416943.html
  7. M

    Todays wrenching

    Looks good
  8. M

    The Daily Chat Thread

    I agree, not sure I would take my brand new truck into the woods.
  9. M

    First trail ride/meeting of 2021

    WOW did not think that back tire came up that much!!! Thanks for posting Tom! Great video!
  10. M

    Power Steering Pump Information

    I am looking for some information on the power steering pump. Does anyone know the GPM and pressure for a 93 power steering pump. FSM has the minimum pressure for when it should be replaced. I am building a full Hydro setup for my buggy and need to know if the power steering pump can keep up...
  11. M

    Full Hydro Steering on an 80 info?

    I am looking for some information. I turned my 93 Landcruiser into a full buggy during the COVID shut down, with the help of Ironpig Offroad. The front is three linked, stock axle housing, I have not posted up details on the build yet but will soon. When we did the front, we decide to move...
  12. M

    Todays wrenching

    Looks good!
  13. M

    The Daily Chat Thread

    Sounds and looks fun!!
  14. M

    Fall Gathering 2020 Pic thread!

    Yes same weekend as always. The board is already working on the details! Columbus Day Weekend October 7 - 10, 2021
  15. M

    Spring meeting, torch pass?

    Check again. Its in the Member section of the club forum. Top post, we made it a sticky so it would not get pushed down the page. If you can't find it and are going to make it, just send me a PM and I will add you to the list. Mike
  16. M

    Spring meeting, torch pass?

    Just posted a meeting/run for April 10 at the Battlegrounds for April 10. Its in the member section.
  17. M

    Spring meeting, torch pass?

    If you guys are interested I will put something together for April 10 or 11 either at Battlegrounds or Brookridge. Brookridge would need to be April 11 its already booked on the 10th. Battlegrounds is located in Rutland, MA; Brookridge is located near Gardner, MA
  18. M

    Spring meeting, torch pass?

    Thats to bad. Pretty decent place.
  19. M

    The Daily Chat Thread

    Thanks. I tried it several ways. What worked best was to lay the sheet on the tubes and start clamping it from the front to the back using two by fours to spread the stress. I worked some of it with a hammer but not much. I removed the sheet, welded on tabs from ruff stuff that are threaded...
  20. M

    Spring meeting, torch pass?

    I am ready for a run, maybe we should do Harris Mountain. If you want to set up a run let me know, I will post it on the NEA site and make sure the date is open.
Top Bottom