Search results

  1. GA Architect

    What have you done to your Land Cruiser this week?

    Traveled a few hours and spent some time with other 40's in the area. A 'Thanks' and shout-out goes to @Wadesters for making this happen!
  2. GA Architect

    Builds The Architect's '77 FJ40

    G - The ECM on my original Sniper went bad and Holley sent me a totally new unit. I run the standard initial setup for the 2F engine, and I haven't deviated from those setting at this time. I will say, before it warms up, using the engine brake can make it stall once you press in the clutch...
  3. GA Architect

    FJ40 Temperature Gauge Range

    FWIW: On my '77 I have two temp senders and gauges. One is the OEM temp sender & gauge and the other a Sniper temp sender in the block drain. My OEM gauge sits about the first tick-mark, and that is about 185 - 188 on the Sniper read-out. Evey once in a while after driving in the heat, then...
  4. GA Architect

    What have you done to your Land Cruiser this week?

    That is my wife's cousin's truck, and is not your run-of-the-mill 3600. It has a Cummins 12-valve in it. It's just one of many old trucks he has. Now the tan Chevy G30 4x4 van is his son's slow ride to the marina.
  5. GA Architect

    What have you done to your Land Cruiser this week?

    Yep, Red Top Marina across from the dam.
  6. GA Architect

    What have you done to your Land Cruiser this week?

    Took it to a crawfish boil.
  7. GA Architect

    Wanted FJ40 Fire Wall Hand Throttle Bracket as seen below

    The one below is what I need.
  8. GA Architect

    Tool bags

    Have you guys seen this thread in the small business section? 'Tool Rolls'
  9. GA Architect

    Wanted FJ40 Fire Wall Hand Throttle Bracket as seen below

    I have the dimensions of the bracket, and even bent one. However, the metal I bent wasn't thick enough and I don't have a press to deal with thicker steel. I plan to try and weld a stiffener on it, but haven't messed with it yet.
  10. GA Architect

    Wanted FJ40 Fire Wall Hand Throttle Bracket as seen below

    Yep, bump....still looking.
  11. GA Architect

    What Gasoline Fuel Grade to Use?

    For Ethanol-free gas stations in the US & Canada, > click here <
  12. GA Architect

    2F Valve Cover Question

    Nice VC, is that powder coated?
  13. GA Architect

    Grommet for fuel tank cover and floorboard

    What size hole? I probably have a grommet that will work.
  14. GA Architect

    FJ40 1976 Sluggish/Strained Starts Hot Engine 2F…Exploring Heat Shields, Carb Cooling Fan.

    I know it has been done before, but another well documented process & procedure is always helpful. :)
  15. GA Architect

    Maximum speed can´t be reached

    Yeah, 160KMH, really???......not in mine. I may have had it close to 140KMH once, chasing the infamous @POTATO LAUNCHER & Texas Gang across New Mexico. But that was for a short distance. Now, I have sustained 70/75MPH (120KMH) for 3 to 4 hours on the flat lands, no problem.
  16. GA Architect

    Builds The Architect's '77 FJ40

    Brother, if you were close by, I'd more than be happy to let you take my 40 out for a spin to see for yourself. The power performance is very noticeable right off the bat. Was it worth it? To me it was. I drive mine most days and it performs similar to my Tacoma. Summer time hot starts...
  17. GA Architect

    Aisan 2F Carb Secondary Paper clip test ?

    I believe it was the Hygrade 791B kit that had it. If you need it, send me a PM.
  18. GA Architect

    Aisan 2F Carb Secondary Paper clip test ?

    You need the diaphragm: 21669-61060 Seems like the Keyster kit has one in it....I may have one you can have, let me go look.
Top Bottom