Search results

  1. goranvolvo

    8x Series V8 Swaps

    i did same thing i swapped to 4.88 before engine swap and just left it in i run 5.3 LS with 4l60 on 35 " tires it runs on higher rpm but you can feel the torque especially off the road and i m leaving it in
  2. goranvolvo

    Share a pic just for the hell of it!!!

    just south from animas fork colorado ghost town
  3. goranvolvo

    What Did You Do with Your 80 This Weekend?

    any difference after installing sound deadening insulation
  4. goranvolvo

    BUILD: Third time's a charm - LX450

    what i did underneath the scoop i used silicone to glue 1/4 vacuum line in front and around the hood hole so basically it stops the rain from going in the engine bay not 100 % but helps a lot
  5. goranvolvo

    is POR15 a preventive treatment for a good frame? (went with Macropoxy 646)

    for me best protection is gear oil mixed with transmission oil and sprayed under car after application drive of road get some dust on the oil and it will not rust
  6. goranvolvo

    8x Series V8 Swaps

    i used toyota power wire for ECU also used toyota starter wire to gm starter oil pressure sensor will need to be added to GM oil pan or make adapter to fit it to gm oem spot temp sensor can be machined to fit in gm hole i m using double sensors gm and toyota if you want cruise you m must...
  7. goranvolvo

    8x Series V8 Swaps

    here you can find all information about wiring with diagrams so you can make your own harness if you have original harness it is pretty easy to put it together all you do is pull extra wires install 4 fuses and all done read the web site you will find all answers also you can use that...
  8. goranvolvo

    SOLD  heated seat switch will fit in center console 80 series

    in good used condition what you see in picture is what you will receive i already marked wires pay pal 70 $ shipped USA only
  9. goranvolvo

    2007 5.3L ls in 1991 80 series

    just google 4l60e shallow pan all you lose one quart off oil but it fits perfect it is cast block i believe it was last year for cast blocks on 5.3 this motor has plenty power for what i use my land cruiser i go to remote areas and far from home my build is geared toward reliability...
  10. goranvolvo

    For Sale heated seat switch will fit in center console 80 series

    i just packaged it did not ship it
  11. goranvolvo

    For Sale  heated seat switch will fit in center console 80 series

    in good used condition what you see in picture is what you will receive 35 $ shipped USA only PayPal only
  12. goranvolvo

    What Did You Do with Your 80 This Weekend?

    crazy glue and some duck tape will fix it
  13. goranvolvo

    SOLD  heated seat switch will fit in center console 80 series

    in good used condition comes what you see in picture is what you will receive 40 $ shipped USA only
  14. goranvolvo

    FREE 3fe valve cover gasket

    yes it is 8 $ for shipping flat rate priority USA only i m keeping it for another week otherwise i m throwing it in garbage
  15. goranvolvo

    FREE  3fe valve cover gasket

    i have new valve cover gasket off my 1991 LC with 3fe , swapped the engine no need for gasket just pay shipping or i m junking it
  16. goranvolvo

    Wire terminal crimping tool ?

    look around your house and garage you have over 50 % items from CHINA so guess what YOU do support communism and if you really stand behind what you just stated fact is you would be walking naked
  17. goranvolvo

    Wire terminal crimping tool ?

    there is no need for brand name , if he gets Knipex terminal crimper it will cost him over 150 $ but on amazon you can get one for about 20 $ and wire striper for 30 $ that is total off 50 $ and it will work perfectly fine i m using cheap one over 15 years with no problems
  18. goranvolvo

    Any pinzgauer guys out there?

    what do you want to know i do not have one any more but owned one for long time and worked on pinzgauer in school
Top Bottom