Search results

  1. njccmd2002

    Need the rear panhard rod torque specs.

    So im in the middle of doing airbag instalation on a 2013 cruiser. And im ready to torque the bolts and nuts so far ive found that the following require Wheel 97 ft lbs rear Sway nut connected to KDSS 74 ft lbs rear Shocks 72 ft lbs Rear sway bar small nuts 22 ft lbs For the life i...
  2. njccmd2002

    Grom VLine

    Attention anyone with back up camera issues .......... This is an issue after disconnecting the battery , did a research on it and happens often on many cars. I was able to fixit for now, I hope. after reading several posts. Disconnected my battery overnight, then I came in the morning and...
  3. njccmd2002

    Grom VLine

    2013 lc. any camera use the screen turns dark. everything else works. ive contacted support. Ive also disconnected my battery again. and no dice. I remember a year ago, i disconnected my battery, and no sound would play in radio. it worked again when i disconnected the battery and...
  4. njccmd2002

    delete post please

    delete please
  5. njccmd2002

    Grom VLine

    Just installed my vline2 and of course. My cameras dont work. I was able to install everything else. When i put reverse, camera flickers. The camera issue may be a big no for me. Should have read all this problems before forking out the money
  6. njccmd2002

    2013 Bouncy rear suspension after towing

    nope, the tires had been balanced often, but it could have gotten out of balance in the rear during this trip. I hope is something simple. but Im leaning into just airbags for now, when towing and go from there. once i find source of vibration
  7. njccmd2002

    2013 Bouncy rear suspension after towing

    i have not had time to go over the suspension, like I said, i thought it was the trailer. The truck was never abused, and mostly highway miles. has offroaded on loose rock maybe twice, so i doubt its going to be something serious, It could be maybe unlucky, or an unbalanced tire this time...
  8. njccmd2002

    2013 Bouncy rear suspension after towing

    been looking at these https://www.metaltech4x4.com/ome-200-series-land-cruiser-medium-load-springs-no-lift/ or these https://www.metaltech4x4.com/icon-2008-up-toyota-land-cruiser-200-series-1-75-dual-rate-rear-spring-kit/ but not so sure. of course these with airbags....
  9. njccmd2002

    2013 Bouncy rear suspension after towing

    tought about it, but the feeling gets worse sitting in the rear.. plus the steering wheel does not vibrate.
  10. njccmd2002

    2013 Bouncy rear suspension after towing

    all 4 shocks were changed, front were changed before the rears. Changing the rears solved the bouncy problem. when you ride the rear seats, the bouncy feeling gets worse...
  11. njccmd2002

    2013 Bouncy rear suspension after towing

    Hi guys, second time this happens, first time after I towed with the 200, the rear suspension fell bumpy, and I decided to change the rear shocks. I felt like the shocks had blown, and the feeling went away with new shocks. At that time the car had approx. 95K miles and I felt it was time to...
  12. njccmd2002

    Wanted 1981 fj40 dust shields or covers front axle.

    thanks, but that's a little more of what I really would like to pay for them....
  13. njccmd2002

    Wanted  1981 fj40 dust shields or covers front axle.

    need the pair of dust shields, covers, or backing plates. (so many names) its for an 1981 fj40, but ive been told an fj60 could fit. located in jackson tn 38305. thanks, paypal ready
  14. njccmd2002

    For Sale SoCal: Section 143- FJ62 disc brake dust shields VG condition

    thanks for responding, ill keep looking
  15. njccmd2002

    For Sale SoCal: Section 143- FJ62 disc brake dust shields VG condition

    i was going to send pm but then i remembered your post. would you take 150 shipped to jackson tn 38305
  16. njccmd2002

    1971 Fj40(gone) / 1974 FJ40 Build , Jackson Tn.

    On september 3. “ copied from facebook. Greasy pumpkin anyone. Im still cleaning this thing. Hour and half and several rags later. Does nor grind, bind, and looks to be in good shape. But im not an expert. Have not lashed it yet. No degreaser was used to clean only hands and rags. Will get...
  17. njccmd2002

    1971 Fj40(gone) / 1974 FJ40 Build , Jackson Tn.

    On september 1st “ Copied from facebook” Hi, wil be rebuilding this axle very soon. Seen the project wrongway video. And know everything now. as of sep 14 bought a complete kit, or the most complete kit that you would trust. I saw many out there. Some missing bearings, some look chinese...
  18. njccmd2002

    1971 Fj40(gone) / 1974 FJ40 Build , Jackson Tn.

    On august 15 “copied from facebook“ Well how about that parts 47703-60020 and 47704-60020 aka dust shields are discontinued. Lol. Anyways... Spent couple of hours taking apart one side of the front axle. Will probably see if i get locking hubs, since it had these plates that lock the axle...
  19. njccmd2002

    1971 Fj40(gone) / 1974 FJ40 Build , Jackson Tn.

    On august 9 “ copied from facebook” Is it worth the hassle trying to get this arm off? Or id be better off cutting it and buying a new one. Lol. As you can see the puller bent. As of sept 14 it is still attached. Lol All you see on floor is rust and frame parts from this rusted out parts...
Top Bottom