Search results

  1. 7

    ICON Cruisers Eucalyptus paint code

    Can anyone help me out with a paint code for ICON Cruisers eucalyptus? Pretty pretty please. Thanks guys.
  2. 7

    For Sale  1978 FJ40 parts

    Front seats with headrests, seat frames and center console. $300 Radiator mount / support $70 Metal fuel tank with new sending unit $150 Metal fuel tank shroud / cover $150 Original gauge cluster $200 New poly fuel tank in box $150 If these prices are way off please let me know. I don't...
  3. 7

    Full width Chevy axle help leaf help

    Putting a spring over Dana 44 up front. Spring pad centers are 32" wide. I cant put the shackle end of my spring below the frame because it throws my caster way off. I cant outboard the mount higher up the side of the frame because the frame width is the same width I have between my springs and...
  4. 7

    Dana 44 with power steering

    Hey guys, can anyone give me some pointers here. Ive got a Dana 44 going in the front of my 40. I want to run a power steering box (Saginaw maybe). Can I do this and keep the steering arm on the drivers side or do I have to go to crossover?
  5. 7

    For Sale  40 and 60 parts

    1978 FJ40 parts. All parts are o.b.o. Will combine for discounts. Peeples Valley AZ. FJ40 4 speed transfer case case with broken front output nose cone. Comes with empty 4 speed t case housing, good nose cone. T case rebuild kit. $250 (output cone by itself is going for $250 on eBay) Stock...
  6. 7

    New drivetrain old gauge clustee

    I tried this in the hardcore section but didn't get anything. Im swapping in a Tbi Chevy 350 with 700r4 and 241c. Can I make the stock speedo work with the 241c VSS? What about the rest of my gauges with this computer controlled motor. I like the old gauges and would preferto keep them. Thanks...
  7. 7

    New drivetrain old gauge cluster

    Im swapping in a Tbi Chevy 350 with 700r4 and 241c. Can I make the stock speedo work with the 241c VSS? What about the rest of my gauges with this computer controlled motor. I like the old gauges and would preferto keep them. Thanks in advance.
  8. 7

    transmission and transfer id.

    Can someone tell me how to identify a transmission and transfer case that was given to me with my fj40 cruiser (p.o. said it was out of a fj60)? I cant find any kind of numbers on the trans except 28y on the drivers side (where would they be). Transfer case looks like it has 2i0745 on it. Any...
  9. 7

    FJ 40 1 ton build questions

    Hey guys I'm in the process of doing a ff Dana 60 swap along with a sm465 and 205. I need a little help with your thoughts on suspension, I don't really want to get into a 4 link at this point but I want to push the rear axle as far back as possible. What do you think about flipping the stock...
  10. 7

    86 22re running on three cylinders?

    Hey guys, looking for some help with an 86 Toyota 22re pickup efi. Over the last two days it started running rough and lost power. I pulled the plugs to check compression (all good) but the number two plug is covered with oil (all others golden brown). Pulled the number two plug wire while...
  11. 7

    CJ5 Steering Column

    Can anyone provide me a pic of a non-tilt jeep cj5 steering column? I am having a hell of a time figuring out how the shroud between the steering wheel base and the dash stays in place. I know that there is a dash bezel and also a shroud to cover the column but my shroud slides down into the...
  12. 7

    International Blue or Continental Blue?

    Has anyone sprayed their vehicle with Ace Rust Stop International Blue or Continental Blue? If so, do you have pics? If i choose to go with the International Blue machine paint do you guys recomend doing a top coat of clear?
  13. 7

    How to identify Trans/T-Case & HELP.

    Hey guys, I have a 78 FJ40 that has a V-8 conversion done by the p.o. The nose cone is snapped off of the t-case, front drive shaft is missing and there is no yoke/flange on the front axle. The p.o. gave me several items including a trans and t-case that he said was out of a 60 and supposedly...
  14. 7

    Shipping Doors

    To those of you who have shipped doors, what is the best way to ship, who did you use, is it expensive. What do you think the weight is of a door from a 78 fj40 with glass, handles, panels, etc.
  15. 7

    Newbie to forum needing help

    Hello guys, I want to start by saying thanks to anybody who can give a little help guiding me in the right direction. About 10 years ago my father sold my FJ 40 out from under me while I was away at school. Ever since I have wanted to replace it and i was finally able to. Last week I came across...
Top Bottom