Search results

  1. Biscuit

    For Sale  Boulder, CO: FJ40 front tube bumper

    Selling the old front bumper that was on the FJ40 when I bought it. I added bolts through the light hoop for mounting a hi-lift. Hi-lift secures with wing nuts. QuickFists are there to provide some vibration damping for the jack (one is busted). Also added two QuikFist mounts on the front for a...
  2. Biscuit

    SOLD  Boulder, CO: Con-Ferr FJ40 front tool box

    Lockable Con-Ferr FJ40 front bumper tool box. Pulled it off my 40 when installing the new ARB catcher mask bumper. Mounts to the front frame rails and bumper. Price: $150 + the ride Location: Boulder, CO Shipping: Prefer pickup, but can look into shipping. It's an awkward size.
  3. Biscuit

    SOLD  SoCal: FJ40 jump seats mid-years short no leg with seatbelts

    Since I will likely never be putting these back in the FJ40, I am selling the jump seats I have for my 1974 FJ40. I ran these in the truck for about 6 months before wanting the cargo space back. They have had one piece of the frame repaired on each. Not the best work, but it holds an adult...
  4. Biscuit

    SOLD  [SoCal] Moving Sale: Random FJ40 Parts

    All items have been sold or dropped off with Mark at Mark's Off Road. Carburetor throttle linkage bracket: $30 Dip sticks: $10/each Coil (not sure if functional): $5 Distributor caps: $10/each 4 Blade Fans o’ Death: $5 or free if you come get it 1974 Driver Seat (needs new bottom cover)...
  5. Biscuit

    SOLD  SoCal - Cruiser Solutions Deluxe Carpet Kit

    I have a Cruiser Solutions carpet kit that I bought from TCSTARK years ago, but have never even opened the box he shipped it to me in. Since I am moving and wont be going this route, I'm selling it. it has been installed once. From the description when I bought it "There are holes in the carpet...
  6. Biscuit

    Rear hatch lock missing threaded stud for lock arm

    After finally getting keys made for the doors on my '74 a few months back, today's project was going to be to finally install the replacement lock arm on the rear hatch lock. When I pulled the access cover off, I found that the threaded stud had gone missing (or may have never been there to...
  7. Biscuit

    For Sale  SOLD BJ42-LX Sliding Side Windows - Los Angeles

    I have a set of late model 40 series (from B/FJ42-LX) sliding side windows for sale. I have decided to go another route with my truck, and am not going to use them. The metal frames have been painted. I also had glass tinted. The glass is not yet installed, so the tint can easily removed (I am...
  8. Biscuit

    For Sale  FJ40 Transmission Swap Left Overs - SoCal

    Looking to clean out the garage a bit. The prices do not include shipping. I am willing to discount if you are able to come get them in 91214. 3 Speed Bellhousing, Inspection covers (both pieces), Clutch Fork Boot, and Timing Window Cover. $20 Transfer case stuff. Will need to be cleaned. 3...
  9. Biscuit

    For Sale  4 speed flywheel inspection cover - SoCal

    SOLD I have a one-piece flywheel/clutch inspection cover left over from my H42 swap. I had prepped and painted the cover prior to realizing I needed the two piece inspection cover. $60 plus shipping from 91214. SOLD
  10. Biscuit

    For Sale  BJ42-LX Sliding Side Windows - Los Angeles

    I have a set of late model 40 series (from B/FJ42-LX) sliding side windows for sale. I have decided to go another route with my truck, and am not going to use them. The metal frames have been painted. I also had glass tinted. The glass is not yet installed, so the tint can easily removed (I am...
  11. Biscuit

    Biscuit's Keeping The FJ40 - Customization/Improvement Thread

    Recently I went through an existential crisis over my FJ40 (see Chat thread here), and I have decided that I can modify my 40 to do what I want it to do. Below is the list of projects that I will be tackling. I know it won't be cheap, but compared to buying a new to me replacement truck that...
  12. Biscuit

    Dropping the transmission: transmission jack, floor jack with adapter, or hoist

    I'm getting ready for my week off of work to spend working on my 40 and the transmission swap is the big project. So my question to the Mud hive-mind is: what is the best way to support and safely lower the transmission/t-case? 1) Transmission specific jack 2) Floor jack with some sort of...
  13. Biscuit

    Hardtop Side Panel Window Stamped Area Dimensions

    Does anyone have the side window glass removed from their '71-'76 hardtop and able to take two quick measurements for me? What I need to know is what the height and width of the stamped that the window weatherstripping sits in. Not what the size of the hole is, but the stamped/indented area...
  14. Biscuit

    Los Angeles shop to Laser/Plasma/Water Jet 16ga Steel?

    I need some large (~24"x36") sheet metal, probably 16ga steel, CNC cut to make adapters to mount BJ42LX sliding windows on the hard top for my 1974 FJ40. I have the design drawn up in SolidWorks (see this post)., now I just need to figure out what type of cutting would be best and find a shop...
  15. Biscuit

    Wanted  FJ40 4 Speed Bell Housing [SoCal]

    I'm looking for a FJ40 bell housing for a four speed transmission. (The one with the engine mount) Prefer somewhere near Los Angeles.
  16. Biscuit

    Sheet metal CNC plasma/water jet/etc cutting question

    I have a few questions for those that have experience cutting sheet metal with a plasma cutter/laser/water jet or really any other way that has CNC precision. I'm looking to have two identical adapter pieces made so I can fit some OEM late model hardtop side sliding windows on to my FJ40 (the...
  17. Biscuit

    For Sale  [SoCal] - Misc. FJ40 Parts

    I'm cleaning out some old parts I no longer have use for. Here is the current list. I'll be adding a few items as I find them. All prices are plus the ride. If it can go USPS flat rate it will. I'll put as many items in a flat rate box as will fit. Local pickup is an option if you are in...
  18. Biscuit

    Biscuit's 2013 Projects Thread

    This will be a "build thread" of sorts. Hopefully it will keep me motivated to keep moving forward with the various projects on my 40. Also it will allow me to share what I have going on. I have many projects in mind; some big, some small, some in the middle, and some that may not happen at...
  19. Biscuit

    Can it be fixed? Fresh Push/Pull Cable Sheath Detached From Tube On Dash

    My Fresh air push/pull cable sheath has pulled out of the tube that is used to hold the cable to the dash. Originally the plastic coated metal sheath was crimped inside the metal tube that holds the cable assembly to the dash. This seems to be a common failure point. :bang: Has anyone been...
  20. Biscuit

    Tire/Fuel Carrier Design, will it work?

    I'm working on finally designing what I want for carrying both the spare and fuel cans on the back of my 40. I currently have my 33x9.5 spare on the stock carrier and it is working well. I was going to add a driver side plate tire carrier for fuel cans. With the sil rust and the number of...
Top Bottom