Clean Clear title in my name. Current registration good through January 2021
located in santa clara, ca. Minutes from San Jose International (SJC) airport if you want to fly in and drive it home
i'd drive it anywhere
passed smog 10/5/2020 but will throw a P0401...
$80 + shipping to US
I never followed through with the idea of getting these cleaned/balanced and swapped into my fj62. Maybe you will
They should be in working condition but I can not confirm that. Orings are dry and will need to be replaced
this might be a little out of scope, so my apologies if it is. I just acquired a 1990 k2500 GMC truck with an ATS turbo kit on it and i'm not sure exactly which one it is, the 088 or 085 version... mostly because these kits seem to be pretty much orphaned by their manufacturer at this point and...
Please PM to be sure you get my attention
pedal bucket for a manual tranny swap into an fj62
brake and clutch pedal included
$100 shipped to lower 48
paypal accepted as "gift" or you add %5 to cover paypal fees
fj60 pedal bucket with brake and clutch pedal- $50
h42 transmission - $150
4speed transfer case with spacer - $150
fj62 passenger side front door: glass missing -$75 each (rear door and front fender gone)
i would rather not ship this stuff, because i have no idea how and with my cruiser gone...
bridgestone dueler at revo 2, 285/75r16 on 16x8 6x5.5" with 3.5" backspacing. they fit nicely on my former fj62 with OME heavy/heavy lift.
located in santa clara, ca
IMG_20111113_101358 by biggerproblems, on Flickr
lots of tread left
lots of tread by biggerproblems, on Flickr
blunt honest truth: the engine is showing signs of high mileage because it has high miles. plugs 4 and 5 foul with oil. rings, valve seals, valve guides... all 3? i don't know and the price reflects this
Please send a PM for fastest response
1989 Toyota LandCruiser...
I have an 89 FJ62, OME heavy/heavy springs and i just put new bridgestone AT REVO2 tires on it monday, 285/75/16. it has about 230k miles on it.
some background: when i got it i put 9.5x33-15 BFG at KOs on it prior to the lift, it drove fine with nary a pull or wobble. after the lift, i...
First off let me say i'm posting this for a friend, but it might as well be part mine cuz he always asks me to help work on it.... "hey bryan you have time to put on a lift this weekend?" "you have time to swap axles this weekend" "wanna help me look at it in the parking lot when i should be...
i got 15x8 teflon coated mojaves. they fit without rubbing the TRE though you can't tell it from these pictures becuse i'm not a photographer. if the adhesive wheel weights will stick to teflon (hummmmm) i can run them without spacers.
the other issue is i need extended lug...
$5000 offers considered, advise on actual value appreciated
this is my daily driver. if i did more offroading i'd keep it but since i don't i'm going to see if it sells. i would not hesitate to drive it across the country.
- automatic transmission
- OME (old man emu) suspension...
my passenger side front door is pretty rusty. i've found a replacement but it's red, which doesn't match the dark grey/tan two tone on my fj62.
has anyone found spray paint somewhere that matches factory colors reasonably?
i've also considered just painting it black like the tailgate and...
a little story....
the front axle on my land cruiser was rebuilt a few months ago... the whole thing: knuckles, wheel bearings, seals, rotors, calipers all of it.
fast forward to this monday, a strange noise coming from the front somewhere. it's intermittent (great, hard to reproduce) and...
i need tire chain edumacation please
what's the difference between diamond style and plain horizontal chain?
what will ride better?
they'll be used for snow covered roads when CalTrans says i have to put them on to get to the ski slopes. it's conceivable i'll use them in mud some...
$750 for 5 rims, shipped within california, probably arizona and nevada too.
6 lug, 3.75" backspacing which i've heard will work without spacers on a 60 series cruiser.
i got these through a buddy and my situation changed, i can't keep these and they've never had tires on them. they're still...
i have to replace the compressor and dryer this weekend so i can get the system recharged.
i've never worked on an AC system before, any caveats? it's already evacuated due to the leaking compressor so odds of freezing my hands off are slim.
what kind of oil do i need to put...
i'm slowly gathering parts to convert my FJ62 to a manual trans, i still need the following
pedal cluster including the sheet metal around it
trans mount and cross member
i'm probably forgetting a few things, i'll update as i get things...