Search results

  1. M

    BJ60 Fuel tank lock ring

    Does anyone have experience removing broken 4 mm screws from the fuel tank 'lock ring'? Specifically, I have a 60 series, 77001-60241 fuel tank with two of the 4mm screw heads missing from the mounting ring where the suction/supply tube gets installed. It gets tricky because the threaded holes...
  2. M

    Fuel tank lock ring repair

    Does anyone have experience removing broken 4 mm screws from the fuel tank 'lock ring'? Specifically, I have a 60 series, 77001-60241 fuel tank with two of the 4mm screw heads missing from the lock ring where the suction/supply tube gets installed. It gets tricky because the threaded holes in...
  3. M

    BJ60 fuel tank removal and emission tube#3

    I dropped the tank on an '85 BJ60 to replace a cracked fuel suction tube. Possibly my least favorite job to date. While the tank is out, I want to replace old and rusty with the cleanest parts I can find. There is an evaporation line, 77244-60140 fuel emission tube#3, back there, and if I'm...
  4. M

    BJ60 erratic temp and fuel gauges

    Has anyone had a temperature gauge that, for now, inaccurately went past H, and at the same time a fuel gauge that went off the chart while driving? No rhyme or reason that I can gather. The gauges, depending on their mood, may stay there for a long, long while, and at other times may drop back...
  5. M

    '85 BJ60 Rear Differential replacement

    Hi Gang, I don't believe this a strictly 3B diesel problem, but since the truck is a BJ60, I'll start here. My rear wheels locked up completely while coming to a stop the other day. I was traveling about 35 mph at the time. There was only one noise, or warning, when I let my foot off the...
  6. M

    A/C Idler pulley bracket

    Does anyone have a lead as to where I could find an A/C idler pulley mounting bracket? Its for my Canadian '85 BJ60. 3B engine, everything stock as far as I can tell. I've tried Cruiserparts and Cruiser Outfitters with no luck. I've currently got the A/C compressor. I need the 3rd C/C crank...
  7. M

    1985 BJ60 A/C belt

    Does anyone have a 3B engine with just two crank pulleys and A/C? One is definitely the power steering. The other, on mine, seams to do the alternator, fan and A/C compressor. Currently I have just the Alternator belted with the crank and fan. The A/C pulley is perfectly lined up with those...
  8. M

    1985 BJ60 A/C belt

    I'm trying to get my A/C working. I purchased the truck without the A/C compressor fan belt. The A/C pulley lines up with the alternator, crank and fan pulleys which are currently belted together. I ordered a Land Cruiser repair manual which shows the 3B engine having the A/C belt separate from...
Top Bottom