Search results

Hey guys, The little display screen between the gauges stoped working. It was flickering on and off for a little while now it's black. Anyone know how to replace it? Thanks, Carl

Done and done! You guys saved me a lot of money and headache, next time you're in NYC beer's on me! ~ Carl

You guys are the best. Thank you!

Thank you. Do you have the actuator part number?

The passenger door lock on my 200 isn't working and I need to get in there to check it out. Any advice on removing the door card so I don't ruin it? Thanks, Carl

My 81 need a charge. The original AC works but it needs an R12 charge. It seems like I can still find cans or R12 but I've never used it. Any advice and how -to tips? An how much would I need? Thanks, Carl

Cool! Thank you guys!

ATF, really?!? Not power steering fluid? It is old, how do I drain what's there and replace? The belts are old too.

Something new - my power steering has started to squeal when the truck is cold. Goes away when it's warmed up. Any thoughts? What should I be looking for? Thanks, Carl

Fantastic! Thank you!

Been staring at the diagram above and I'm confused about the path of the current and the comments below. Current comes from the battery through B to the 30amp breaker then to the the relay. when it exits the relay it travels to the fan motor, but it also connects to the 10amp fuse AND line D...

The relays are upside down and close the firewall. Can anyone tell me which relay is which? Please remember this is an early 60 with glass fuses.

g-man, the relay is hanging below the dash - not sure where it's suppose to attach. The top of it is missing and the element inside is exposed. When tested, current is present at the element inside and I believe current is passing through, but I will test it further.

This is exactly what I suspected. If I’m understanding this wiring diagram correctly, and based on your post(s) it would seem that I have two shorts. The first on the relay/circuit breaker feed, and the second on the AC fuse feed. And it would seem the current jerry-rigged system bypasses...

Thank you OSS! I don't have a FSM. Would you mind telling me where B and D are drawing power from?

I need some schooling on the wiring circuit on my 60. It's an 1981 glasses-fused truck, but looking at the POS Haynes book I have the wiring diagram seem to match a 1982. The heater fan stopped working and while tracking down the issue I discovered that behind the fuse block, the 10a fuse for...

Thanks guys!

Hey guys, how many miles before you needed a brake job? Do you always change the rotors? Did you do the front and back at the same time? Thanks, Carl

Yes, I thought they had been and it was confirmed when I pulled the panels. The new cloth was put on top of the old cloth. That was the extent of the work done on the doors. I would have been pist if I had paid someone to do that work.