Search results

  1. M

    BJ60 Fuel tank lock ring

    Does anyone have experience removing broken 4 mm screws from the fuel tank 'lock ring'? Specifically, I have a 60 series, 77001-60241 fuel tank with two of the 4mm screw heads missing from the mounting ring where the suction/supply tube gets installed. It gets tricky because the threaded holes...
  2. M

    Fuel tank lock ring repair

    Does anyone have experience removing broken 4 mm screws from the fuel tank 'lock ring'? Specifically, I have a 60 series, 77001-60241 fuel tank with two of the 4mm screw heads missing from the lock ring where the suction/supply tube gets installed. It gets tricky because the threaded holes in...
  3. M

    BJ60 fuel tank removal and emission tube#3

    Cheers, Yes, that is the line georgebj60. I've had all the bolts sprayed with Parts Blaster for many moons now, in preparation. But geez, that line runs all over the place. This is my daily driver/work truck as well samwise, so it's good to hear you haven't any troubles without it connected...
  4. M

    BJ60 fuel tank removal and emission tube#3

    I dropped the tank on an '85 BJ60 to replace a cracked fuel suction tube. Possibly my least favorite job to date. While the tank is out, I want to replace old and rusty with the cleanest parts I can find. There is an evaporation line, 77244-60140 fuel emission tube#3, back there, and if I'm...
  5. M

    BJ60 erratic temp and fuel gauges

    Thanks Rosco, A dash disassemble is long overdue. I've other gremlins to tackle back there, so I'll check the earth connection(s).
  6. M

    BJ60 erratic temp and fuel gauges

    Has anyone had a temperature gauge that, for now, inaccurately went past H, and at the same time a fuel gauge that went off the chart while driving? No rhyme or reason that I can gather. The gauges, depending on their mood, may stay there for a long, long while, and at other times may drop back...
  7. M

    '85 BJ60 Rear Differential replacement

    I can't say enough good things about JT's Part and Accessories. Carl Montoya walked me through different products and shipped me a 3.7 differential replacement in a heartbeat. I'm back on the road. I am grateful for the JT's ad on the forum homepage.
  8. M

    '85 BJ60 Rear Differential replacement

    I absolutely will. Did you have to replace the 3rd member only? I'm hunting down components now but I'll occasionally have 3 a.m. nightmares about possible damage to the transfer case, etc.. Thanks again.
  9. M

    '85 BJ60 Rear Differential replacement

    Hi Gang, I don't believe this a strictly 3B diesel problem, but since the truck is a BJ60, I'll start here. My rear wheels locked up completely while coming to a stop the other day. I was traveling about 35 mph at the time. There was only one noise, or warning, when I let my foot off the...
  10. M

    A/C Idler pulley bracket

    Does anyone have a lead as to where I could find an A/C idler pulley mounting bracket? Its for my Canadian '85 BJ60. 3B engine, everything stock as far as I can tell. I've tried Cruiserparts and Cruiser Outfitters with no luck. I've currently got the A/C compressor. I need the 3rd C/C crank...
  11. M

    1985 BJ60 A/C belt

    Thanks for the reply jzilla, You have answered my concern. Someone would have probably dealer installed A/C on my rig after the fact. My truck doesn't have the a/c idler pulley. The repair manual I purchased shows 3 belts for trucks with A/C. 1. Power steering 2. Alternator 3. A/C. My BJ60 has...
  12. M

    1985 BJ60 A/C belt

    Thanks MicahMan
  13. M

    1985 BJ60 A/C belt

    Does anyone have a 3B engine with just two crank pulleys and A/C? One is definitely the power steering. The other, on mine, seams to do the alternator, fan and A/C compressor. Currently I have just the Alternator belted with the crank and fan. The A/C pulley is perfectly lined up with those...
  14. M

    1985 BJ60 A/C belt

    I'm trying to get my A/C working. I purchased the truck without the A/C compressor fan belt. The A/C pulley lines up with the alternator, crank and fan pulleys which are currently belted together. I ordered a Land Cruiser repair manual which shows the 3B engine having the A/C belt separate from...
Top Bottom