Search results

  1. HemiAlex

    SAS #3 Official Thread 2019

    Nobody but me is crazy enough to drive drive a 60 from Texas. I’m proud of that.
  2. HemiAlex

    Builds Blue '84 gets a fresh start- EFI and more

    Nitrous 2F.
  3. HemiAlex

    Current options for getting an h55 into 60 series

    I’m pretty sure I’ve got a spare linkage. Let me look.
  4. HemiAlex

    Current options for getting an h55 into 60 series

    I vote Georg. I bought my H55F and a rebuilt split case from him. It worked out perfectly and I’ve put 15k on the combo since last year. He’s great to deal with.
  5. HemiAlex

    SAS #3 Official Thread 2019

    My 60 has a 62 axle housing in it from new because it’s such a late build 87. Pretty much a bolt in for me, but there really isn’t much to it. A decent fabricator could make the mounts easily. I can take detailed pictures of mine.
  6. HemiAlex

    SAS #3 Official Thread 2019

    I’m on my downhill portion: Newer gas tank in Rear sway bar almost mounted. Waiting on a part. New seat foams are In 3FE alternator almost done. I may weld my sliders in now because the seat foams make the truck harder to get into, not because I expect a rock to hit em. After that, a...
  7. HemiAlex

    Alternator altering

    I’m going to do the 3fe alternator this week. The question I have is this: can I use my existing alternator output wiring? I’m trying to avoid making a bunch of changes at once and buying all the battery crimp tools to do My second battery install now. I’ve got a new fusible link wire direct...
  8. HemiAlex

    Average life of cap & rotor in a 3FE

    I did denso 35,000 miles ago. I guess I’ll be fine for a while.
  9. HemiAlex

    Average life of cap & rotor in a 3FE

    How often do you all replace the plug wires?
  10. HemiAlex

    SAS #3 Official Thread 2019

    I may have to be solo then. I could maybe get to Halfway to Amarillo if I leave after work on Friday.
  11. HemiAlex

    Builds My FJ60 project thread...

    One step forward, two back. -ground my flakey frame reinforcement for the Fj62 rear sway bar. But i lost one of the brackets. I have no idea where it went. Searching for another one or two. -installed the low mileage fuel tank that’s much newer and replaced all the feed and vapor lines under...
  12. HemiAlex

    Wanted FJ62 rear sway bar bracket(s)

    I lost my bracket as I was installing the rear bar. I’ll take a single or a pair. I’m just looking for the right angle bracket with the two studs that pass through the frame.
  13. HemiAlex

    Broken evap nipple

    Fixt. Kinda. It’s working and I don’t smell fuel.
  14. HemiAlex

    flat rack on a 60

    https://www.princessauto.com/en/detail/1-500-lb-77-x-50-in-tri-fold-aluminum-ramp/A-p8668196e This would fill up the space a little better.
  15. HemiAlex

    flat rack on a 60

    For reference, the size for a 60 is usually 87x49.
  16. HemiAlex

    flat rack on a 60

    It’s really not a bad size.
  17. HemiAlex

    Broken evap nipple

    I found a fuel safe plastic hose barb that goes from 1/4-3/8” it’s a very tight fit in that broken nipple. This will all fit nicely. I’ll epoxy it in place and call it good. Thanks for your help!
  18. HemiAlex

    What happened to my 4WD?

    I had the same thing happen. You just have to keep the shifter lever away from the floor cut out so it doesn’t bump around and knock it out of gear.
  19. HemiAlex

    What happened to my 4WD?

    Have you checked that your linkage is adjusted properly ? Try disconnecting the shifter and manually put it into each range, see if the noise stops.
  20. HemiAlex

    Broken evap nipple

    As I was dropping my fuel tank today, I broke one of the evaporative system nipples. Aside from replacing the whole trunk mounted system, I thought about just using a plastic nipple exposure in place to patch this. What else could I do to fix this? But I was wondering, since I don’t have an...
Top Bottom