Search results

  1. timchen

    melted engine wire harness

    What’s your symptoms?
  2. timchen

    I might need a new wiring harness, or do I?

    no smoking, haven't smelled the exhaust yet
  3. timchen

    I might need a new wiring harness, or do I?

    my spark plug is quite new, they were only like 2 years old. how ever ill try swap them to different cylinder and see what happens.
  4. timchen

    I might need a new wiring harness, or do I?

    thanks, I got a new set of wires ill put them on and see what happens tomorrow.
  5. timchen

    I might need a new wiring harness, or do I?

    Okayyy, this is driving me crazy. 97 FZJ80 One peaceful afternoon I started the truck, the motor is shaking and I was like that is a misfire, so I drove it in the neighborhood until the check engine light comes up. Turns out it is p0304, number 4 cylinder misfire. The symptoms when I drive it...
  6. timchen

    melted engine wire harness

    Hi there, So you are saying that the you have a misfire but all the wire in the harness that near the edge was still look good? All you did was just re wrap the harness and keep it from heat then the problem goes away?
  7. timchen

    Cylinder 6 Misfire- Problem Solved

    where exactly is the place that rub? Like on the ecu connector behind the glove box?
  8. timchen

    injector service and "while you in there jobs"?

    Well that’s one way to do it lmao
  9. timchen

    injector service and "while you in there jobs"?

    Understood, thanks for the advice lol
  10. timchen

    injector service and "while you in there jobs"?

    My valve cover is surprisingly dry all around lol yeah I’ll change out everything while I’m in there, how hard is it to pop the wires out from the injector clip on the harness?
  11. timchen

    injector service and "while you in there jobs"?

    I know it’s for a peace of mind but is it necessary to delete the egr assembly since it stays close all the time now.
  12. timchen

    injector service and "while you in there jobs"?

    Where can I buy them
  13. timchen

    injector service and "while you in there jobs"?

    Just got a P0304 this afternoon. Good wires and plugs, new cap and rotor. Pretty sure I have a injector problem on #4. I have already removed the upper intake and ill remove the rails and injectors tomorrow, pretty straight forward once having the in take removed. Now the question comes. What...
  14. timchen

    Builds "The Cucumber" build. Ultimate 80-series. 1HD-FT, H152F, PTO and just about every other cool option

    love to see your 80 is finally put to use! I don't know if you sill remember me but I brought a rear hub from you last winter and you hook me up with Justin for the rear axle so I can get my ass back to Florida. Congrats on the build bud! Cheers
  15. timchen

    Soooo what the biggest winch you guys put on your Slee short bus bumper?

    I currently have a warn vr8000 on my slee shortbus bumper and im thinking about upgrade it to a Harbor Freight (I know........) Apex 12000lbs and move my VR8000 to the rear so I will have dual winch setup. The deal on Black Friday from Harbor Freight is just too good to not to think about it...
  16. timchen

    I need a keyed washer for the front end on really short notice, any ideas?

    Hi there, I would just go to the dealer and order one from them. They are not expensive IIRC.
  17. timchen

    Another Crank-No-Start

    Thanks for the info, the problem is fixed, I posted an update below. The EFI main fuse was check at the very beginning and it was good.
  18. timchen

    Another Crank-No-Start

    Thanks for the info, the problem is fixed, I posted an update below.
  19. timchen

    Another Crank-No-Start

    Ok guys update. Turns out it's a loose connection at the fuel pump relay socket or bad contact with in the fuel pump relay itself. I was assuming the fuel pump relay and the EFI relay being faulty so I jump the EFI relay first (the longer two prongs), and then wiggle the socket that plugs in the...
  20. timchen

    Another Crank-No-Start

    97 FZJ80 good battery I do have CEL when key on I can turn headlight on and radio on and dome light on, the voltage waring light above the voltage meter lights up when key on (I was trying to see if its bad fusible link.) Horn works as well. So far I don't have a new fusible link on hand but...
Top Bottom