Search results

  1. D

    Wanted  Black best top doors

    Good evening Mud, looking for a set of black best top doors, let me know what y’all have. thanks in advance. DK
  2. D

    Wanted  OEM fj40 shoulder belts

    Hello Mud, Looking for a OEM set of shoulder belts for my 77 fj40. Please let me know what you have. Thanks in advance Drew
  3. D

    Wanted  9mm brake line tee’s

    Gents, Looking for DF and PF 9mm brake line tee’s. I am replacing all of my brake lines and I need these parts to finish. Thanks in advance Drew
  4. D

    Wanted  9mm brake line tee’s

    Gents, Looking for a DF and PF 9mm brake line tee. In the middle of replacing all of the lines and need these parts to finish. Thanks in advance Drew
  5. D

    Wanted  1967 stock carb

    Hello Mud- I need a carb for my stock 67’ 40, please let me know what y’all have. Thanks in advance Drew
  6. D

    Help needed - restoring my 67 Fj40 brake systems

    Hello Mud, I am in the middle of restoring/replacing my brake system on my 67 and need to know if anyone has a source for the brass T’s. Or what everyone else is doing. (See pic below). I bought all new lines, and when I went to replace the old ones I am having a heck of a time removing the...
  7. D

    Wanted  67 Fj40 PS rear tail light cover

    Hello Mud! I am looking for a PS rear tail light cover for my newly acquired 67 40! Please let me know what you have @wngrog,@65swb45. Thanks in advance Drew
  8. D

    Wanted  Footman loops

    Hello Mud, I need 2 footman loops, let me know what y’all have. Thanks in advance. Drew
  9. D

    Wanted  06-07 low mile Southern LC

    Hello Mud, I am currently looking for a Low mile 06-07 southern LC. Cash in hand ready to buy please let me know what y’all have. Thanks Drew
  10. D

    Help with CEL and VSC off & VSC track

    Hello Mud, I have a 2007 LC with 180,000 miles on the clock and I have been fighting these sympotoms. After about 240 miles of straight driving at 75 and then when coming to a stop the truck starts to idle rough, then has total lack of acceleration, then the truck dies and the CEL VSC off & VSC...
  11. D

    Wanted  Tool roll clips

    Looking for the 2 clips that hold the rubber band that hold the tool roll under the seat for my 77 40. Thanks Drew
  12. D

    Power steering pump ID

    Hello Mud, Please help me ID what power steering pump is on my 40. It is squeaking pretty bad and would like to know which one I have so I can replace it. Thanks in advance Drew
  13. D

    Wanted  77' fj40 DS front door glass

    Hello Mud, I am in the need of a DS front door glass for my 77'fj40. Please let me know what you have. Thanks in advance. Drew
  14. D

    Brake Help!

    Hello Mud I just installed a new City racer booster, OEM master, all new brake lines, new rear wheel cylinders on my 77 40. Now comes the problems. I went to bleed the brakes this evening and I am not getting any fluid from the rear P or D when I crack the lines to bleed . I do get fluid when I...
  15. D

    For Sale  2001 LX 470

    Hello Mud, Just upgraded to a 200 and now the LX has to go. 2001 with 237,000. We have owned it for 5. Years and it has been a great vehicle. Everything works great, but by no means is it perfect. Bumps & bruised on the out side but nothing major. Carpet has stained and the front seats need...
  16. D

    Wanted  77 fj40 igniter

    Hello Mud looking for a igniter for my 77 fj40, please let me know what you have. Thanks in advance. Drew
  17. D

    Amp meter acting like tachometer

    MUD looking for a little help... just rebuilt my wire harness and I dont think my amp meter is operating correctly. It is sitting in the middle when started but when I accelerate it goes all the way to the right, and when I let off the accelerator it goes back to the middle. Thanks in advance...
  18. D

    Wire harness

    Can anyone tell me if a 75' wire harness will work on a 77'? Thanks in advance Drew
  19. D

    For Sale  OEM soft top bows

    OEM bows in great shape No rust, missing the Part that attaches to the Windshield but I have a set from a hard top that I will throw in. Pinhead here on mud has a great thread on how to make these parts. Don't want to ship due to size. Located in San Marcos TX $500 Thanks
Top Bottom