Search results

  1. G

    Windshield base weatherstrip seal for 64'

    I have thought about doing that. Thanks for the info.
  2. G

    Windshield base weatherstrip seal for 64'

    I have a 64' FJ40 and I have been trying to find what the difference is between the windshield base weatherstrip seal on a 64' vs the later models. Anybody know? I need to get a new one and any help with this search is greatly appreciated.
  3. G

    For Sale  1964 FJ40 to BJ40 Unfinished Diesel Conversion Project for Sale – Central Texas

    FOR SALE : 1964 FJ40 to BJ40 Unfinished Diesel Conversion Project for Sale – Central Texas Unfinished Diesel Conversion Project that is looking for a good home. NOT parting out this project, I am selling it as a package. This has been sitting in storage for years and deserves to be driven...
  4. G

    Found Rust in Cylinder Head 3B

    I found the rust when I removed the intake manifold. It looks like water got in through the Venturi, into the manifold and drained into the 3rd cylinder. The whole chamber and valve are covered in rust. I think I'm going to go the route of least resistance. 1) Douse it with a WD-40 or the...
  5. G

    Found Rust in Cylinder Head 3B

    Hello All, So I found rust in one of the cylinder heads of my 3b that has been sitting out side wrapped in plastic and covered with a tarp. We have had a wet and windy winter and summer and I think some water made its way into the engine. It is only in one of the cylinders...
  6. G

    Getting a 3B started after sitting for 3 years

    The records show 275K. Don't know the compression numbers.
  7. G

    Getting a 3B started after sitting for 3 years

    I have a 3B that has been sitting in a crate for 3 years. It came out of a 83 BJ60 and was running before it was crated. What I'm replacing: Oil and filter Fuel Filter Belts Fuel lines Clutch New Fuel Radiator Hoses Anything else? I'm planning on cleaning and detailing the...
  8. G

    Replacing the clutch in a 3B w/ h55

    Thanks all. Plan on getting a clutch kit to get everything I need. I have a 64' FJ-40 that I had a 3b dropped into, so unfortunately I don't have any pics of the cross member. Thanks again!!
  9. G

    Brake and Clutch master: Rebuild or replace?

    That is what I thought. Thanks!!!
  10. G

    Replacing the clutch in a 3B w/ h55

    I have a 1983 3B w/ H55 that needs a new clutch and I am contemplating replacing it myself. How hard is it to replace a clutch, and everything that goes with it? I am a novice mechanic, but my plan is to learn every inch of this engine and to be able to work on it myself. I have ordered the...
  11. G

    Brake and Clutch master: Rebuild or replace?

    So, long story extremely short. I have a Brake and Clutch master cylinder that have been sitting exposed to the elements for several years. There was rusty water in the cup, but the outside looks fine. The problem is they were brand new so I would hate to have to buy new ones. Could they be...
  12. G

    3" exhaust ?'s

    Would back pressure be an issue? I spoke with a tech at a muffler shop and he said that there could be. Also, would I need the stock down pipe from the exhaust manifold? I need one, should I go with 3" from the manifold? Thanks, Michael
  13. G

    Wanted  Exhaust down pipe for 3B.

    I am having a 3b from a 83 BJ-60 installed into my 64 fj-40 and am in need of the down pipe from the exhaust manifold. Thanks, Michael
  14. G

    3" exhaust ?'s

    I am having a 3b installed into my 64' FJ-40 with plans of installing a turbo in the future. If I plan on going with a 3" exhaust when I turbo it, would it be better to go with 3" from the start? Thanks, Michael
  15. G

    Windshield frame gasket resto

    I have a 64 fj and the windshield frame gasket between the frame and the body is pretty cracked. Does any one know of a product that can repair or restore cracked and old rubber? Thanks, Michael
  16. G

    Wanted 3b water pump pulley

    Ok, let me know if you do and how much.
  17. G

    Wanted  3b water pump pulley

    I need the pulley for a 3b water pump from a 83 bj-60. Part# 16371-56040 Thanks, Michael
  18. G

    Part info: Edic on/off wiring harness

    I don't know the proper name and part number, but I am having a 3b from a 83 bj60 put into a 40 and the wiring harness from the edic to the on/off is missing. I am not doing the install and this is the only description that I could get. Thanks for the help.
  19. G

    Wanted  Edic on/off wiring harness.

    I don't know the proper name and part number, but I am having a 3b from a 83 bj60 put into a 40 and the wiring harness from the edic to the on/off is missing. I am not doing the install and this is the only description that I could get. Thanks for the help.
  20. G

    3B pre-swap maintenance ?'s

    Thanks for all the info. Most is being done already, but I will check on the other stuff. I bought it from a fellow member, Kevin Vowles in BC. Great guy. Helped a ton with everything. Michael
Top Bottom