Search results

  1. smokeater

    Wiring an 8274 + Albright

    They have what you need
  2. smokeater

    Wiring an 8274 + Albright

    Next I would try gigglepin
  3. smokeater

    Wiring an 8274 + Albright

    Try Montana Jacks.com
  4. smokeater

    Vent window glass question

    I found these to be a bear...went with the OEM rubber, was successful with one and ended up tearing up the next. I ended up buying another gasket and taking it to an auto glass shop...they got it back in but with what appeared to be a lot of trimming and sealant. Had to do over again I would...
  5. smokeater

    Wiring an 8274 + Albright

    Just wanted to thank everyone who provided information on this thread. I found your suggestions invaluable.
  6. smokeater

    Fair price in used 8274

    I used a great tutorial called “The most thorough rebuild of a Warn 8274” as my guide. The guy has tons of pics.
  7. smokeater

    Fair price in used 8274

    I had read that Warn doesn’t recommend dismantling the upper gear housing because the need for SST for rebuild. I hope you found success.
  8. smokeater

    Wiring an 8274 + Albright

    Many thanks!
  9. smokeater

    Wiring an 8274 + Albright

    @GLTHFJ60 BTW where did you source your cab controls? I can’t find anything like it on the inter web ;) I dig the look instead of the plastic rocker it seems are a dime a dozen. Thanks!
  10. smokeater

    Wiring an 8274 + Albright

    I appreciate your help and more importantly your time!
  11. smokeater

    Wiring an 8274 + Albright

    Does the in cab switch splice into ignition or is it just a on/off switch?
  12. smokeater

    Wiring an 8274 + Albright

    I think I understand now...something like this NVX?
  13. smokeater

    Source for legit Albright contactor in the US?

    I just bought a gigglepin contactor which is reportedly made by Albright....was $120. Wish I would have seen this thread sooner ;).
  14. smokeater

    Wiring an 8274 + Albright

    Can you elaborate on how you’ve wired the relay? A quick search yielded these two on Amazon. I like the Marine grade waterproof but can’t find one over 300amp...the fuse block is self explanatory I guess...these I assume run on the (-) side?
  15. smokeater

    Wiring an 8274 + Albright

    I guess what I am referring to is the instances people report having some sort of quick way to shut off in case of winch failure or short....diagrams show fuses and/or “battery isolater.” Thanks ~smokeater
  16. smokeater

    Wiring an 8274 + Albright

    Doing my research prior to wiring my gigglepin contactor up. I have an ‘83 3 wire with original motor. I understand that the motor case is ground (no actual ground post). Am I correct that the ground on the contactor (14g) then needs to be run to negative post on battery? Also, should I wire in...
  17. smokeater

    TEQ rubber cone bumpers

    Pm’d
  18. smokeater

    Drag link rebuild or replace?

    I suspect that the opposite end of the drag link was fatigued enough to allow the tube to pivot and remain in a position where the pitman arm kept running alongside that edge? All my TRE’s were in pretty rough shape.
  19. smokeater

    Drag link rebuild or replace?

    I think your right. Piece of mind might be worth the effort. I could always hang on to the rebuild kit for a later project. Thanks
  20. smokeater

    Drag link rebuild or replace?

    Hello All, Happy 4th everyone, I'm posted up at the firehouse, luckily for me its been a quiet day so far... So I'm in the middle of performing a little TLC on my steering linkage. I'll be replacing all TRE's, rebuilding center arm, and was planning on rebuilding draglink. When I removed and...
Top Bottom