Search results

  1. S

    Knuckle weeping grease

    Hi Guys thanks for all the comments.. It was the inner oil seal, Replaced this when I did the bearing but I must have pinched it when I was putting the Axle back in
  2. S

    Knuckle weeping grease

    The grease seals?
  3. S

    Knuckle weeping grease

    Hi Guys Did my wheel and knuckle bearings a fortnight ago and I've just noticed the passengers side is weeping grease. Drivers side looks good. Any idea what may be causing this? Thanks.
  4. S

    1fz-fe belt tensioner

    Thanks for such a fast and detailed reply :)
  5. S

    1fz-fe belt tensioner

    Is it okay to take the tensioner I have circled in the photo off to help get the belts off easier?
  6. S

    Tie Rod end retaining bolt

    Did a bit of research and I have the part number Nut - 90171-14042 - Toyota Parts Deal Cotter Pin - 90252-03005 - Toyota Parts Deal
  7. S

    Tie Rod end retaining bolt

    Thanks mate! if i ask for a 17mm castle nut at the auto parts store hopefully they will sell them seperately.. I think its 17mm if i remember correctly
  8. S

    Tie Rod end retaining bolt

    Hi Guys i'm just wondering if there is a specific name for these bolts? And if anyone has the OEM factory part number for these?
  9. S

    Clutch and Rear main seal replacement

    Next week I'm putting my cruiser in to have the rear main seal and clutch replaced. Is there any other major seals/bearings I should get them to replace while they have the transmission off?
  10. S

    Undercarriage caked in oil

    yeah thinking of going the leave it route for most of it but clean it away from anywhere with rubber/seals
  11. S

    Undercarriage caked in oil

    Ahh a hot water high pressure hose.. that’s kinda out of my budget unless you can hire them
  12. S

    Undercarriage caked in oil

    Hotsy?
  13. S

    Undercarriage caked in oil

    Hi guys so the undercarriage of my 80 is covered in oil. I have fixed all the oil leaks that came with the car from the previous owner. Is it worth cleaning the oil off everything or just try clean any parts with rubber etc? if so what is the best method for this type of cleaning? Does a steam...
  14. S

    Best oil for fzj80 97 in Australia

    😂😂🤙🏽
  15. S

    Best oil for fzj80 97 in Australia

    Thank you for the replies everyone. I think I will just stick to what I put in last change.. 15w-40 semi Penrite oil
  16. S

    Best oil for fzj80 97 in Australia

    What is the best oil you would recommend for my 1997 1FZ fe for conditions in australia?
  17. S

    Long Road Trip Preparation

    Thanks everyone for your replies, Going to do a majority of this list on the weekend
  18. S

    Long Road Trip Preparation

    I have a 1997 FZJ80 and I am going on a road trip soon which will be about 2,000 Miles or so. What are the major maintenance jobs I should do before we go away? Besides the obvious Oil change etc Last major thing I did was rear wheel hub bearings. Thanks :)
  19. S

    FZJ80 Power Steering Fluid

    Thanks very much guys I went with Valvoline max life atf
  20. S

    FZJ80 Power Steering Fluid

    Is there a specific Power Steering Fluid you would recommend I use?
Top Bottom