Search results

  1. utahisrad

    Before I open the can of worms....

    Did the fuel filter last year. Tires are in great shape, after the oil change im gunna just take it in and have them rebalanced anyway, probably do a alignment as well.
  2. utahisrad

    Before I open the can of worms....

    Took the front driveshaft off, Ujoints seem good can't see anything wrong with it. Forgot to lock the center diff and it started rolling down my driveway, almost ran me over haha. :doh: Still has the roughness under acceleration, going to pull the plugs & inspect the cylinders and also change...
  3. utahisrad

    Before I open the can of worms....

    Good to know, thanks!
  4. utahisrad

    Before I open the can of worms....

    Uses some oil yeah. Not really any smoke from the tailpipe but it does stink a little. Compared plugs when I pulled the stock ones out (well what was in there when I bought it a few years ago) but they were all pretty trashed. I will pull plugs again and post a pic.
  5. utahisrad

    Before I open the can of worms....

    sounds like im pulling off my front DS tonight. thanks! What should I do about the low compression on cylinder 1? Just leave it be?
  6. utahisrad

    Before I open the can of worms....

    tires are pretty new, lots of tread. Thought about maybe getting the wheels balanced again and doing an alignment for kicks I had them re-done last year I think, will check them though good idea. sweet thanks! fuel would make more sense if it ran rough under neutral as well but when in...
  7. utahisrad

    Before I open the can of worms....

    No check engine light, would the paperclip method show any codes even though the light isnt on? Initially the roughness felt driveline but is very much engine. I think its been getting slightly worse as time goes on. That being said Ive been wrong before thinking it was one thing and it turned...
  8. utahisrad

    Before I open the can of worms....

    Cruiser has 294k miles on it. Hardly drove it this year :( Planning a big trip for next year through the San Juan mtns but might have a bit of a chore for the winter months. Recently I have noticed more of a vibration while driving. Initially thought it might have been something in the...
  9. utahisrad

    Need a head gasket repair DVD ASAP

    you need to pay @IdahoDoug first, then forward the receipt to me in an email. I will then give you access to the files. PM me for my email address
  10. utahisrad

    Different Intake Covers?

    Is there any way to switch to #3 style and use the 96-98 MAF? Im guessing no... :(
  11. utahisrad

    Different Intake Covers?

    I've removed the smog stuff from my cruiser which left the intake with a big protrusion on the side(1). I cleaned it up a little and put a piece of my rubber glove to block air flow. I've seen some nicer intake covers in others' pics and have been on the hunt for one. I found a very similar...
  12. utahisrad

    front sway drop blocks

    Here ya go
  13. utahisrad

    What Did You Do with Your 80 This Weekend?

    Let there be light! Thanks @yodaTEQ, this should have been one of my very first mods.
  14. utahisrad

    What Did You Do with Your 80 This Weekend?

    Installed the hellroaring dual battery system. Been wanting a dual battery for a long time. Very very happy with the setup, and grateful to have a friend who does stereo/electrical work like a heart surgeon. Got two bluetop optima batteries for the price of one, love the local classifieds...
  15. utahisrad

    For Sale  80 series CB/FM Antenna Mount for stock location

    Made by Trail Taylor, sells for $65 new will sell for $50 shipped. Antenna Mounts Ended up going a different direction, going to mount my CB on the back and do a regular fm/am in the front. Missing the small rubber washer. Here are the install instructions: wagongear.com » Antenna Mount Info...
  16. utahisrad

    93 Alarm removal (step by step w/pics)

    Just did this, thanks @jdogg for the instructions. Also found the picture above useful along with the last picture in the zip file located earlier in the thread (shows the alarm harness from the service manual). Ever since I got my '93 its been having alarm issues. I ended up taking the horn...
  17. utahisrad

    What Did You Do with Your 80 This Weekend?

    @LandCruiserPhil PERFECT. thank you sir :)
  18. utahisrad

    What Did You Do with Your 80 This Weekend?

    Random question.... can I splice all the fusible links together into one wire? trying to clean up my battery area. Curious how y'all have them hooked up.
  19. utahisrad

    Meet Marley! 8wk Australian Shepherd

    My neighbor is a photographer and borrowed my beater truck to do a photoshoot. She invited me to come take a few pics so here ya go. Count it as my christmas card :p sure love my pup
  20. utahisrad

    Nice Option for Securing Gas/Water Cans

    Nevermind..... LOL
Top Bottom