Search results

  1. Sloth Cruiser

    Help! Biggest MT Tire for LC 100 Stock Suspension R18

    Wheel size is largely irrelevant. So is having any lift. All a lift does is change static height of vehicle. Unless you are changing the suspension geometry/ modifying bump stops it's still cycling through the same range of motion. Outer diameter/ width of the tire combined with backspacing of...
  2. Sloth Cruiser

    P0171

    Just pull them off one by one. If the ends or any part is cracked it needs replacing.
  3. Sloth Cruiser

    P0171

    Check all the evap hoses in the engine bay. They are easy to replace. I had the same code, new o2 didn't solve it. For me the hose in the rear passenger side of the engine compartment was all cracked at the ends. Went to autoparts store and got a similar sized hose. Solved the issue. I'd go...
  4. Sloth Cruiser

    What have you done to your 100 Series this week?

    Not this week, but last Tuesday replaced front brakes, calipers, rotors. Also replaced inner/outer wheel bearings with @cruiseroutfit wheel bearing service kit. Once you get the hang of getting the cone washers to pop free it's a pretty easy job. Then 2 days later went on a 4 day, 3 night car...
  5. Sloth Cruiser

    Tough dog review thread

    Just wanted to chime in. I installed the standard 41mm? TD shocks front and rear this past January paired with OME 865 springs, keeping the stock t-bars. I've also got the TT upper and lower rear links plus the TT extended sway links front and rear. Truck is stock besides a DIY rear storage...
  6. Sloth Cruiser

    YWST: Front Wheel Bearing Overhaul Kits for the 100 Series (LX470)

    These kits are great. Just ordered a set for my 100. You guys are awesome.
  7. Sloth Cruiser

    For Sale MA: Late Model Toyota misc suspension parts

    Yup, I've still got it.
  8. Sloth Cruiser

    For Sale 2007 FJ Cruiser Massachusetts

    Sorry, it sold to @TheDuc .
  9. Sloth Cruiser

    Elocker/ Air Locker Wiring Mystery (Help)

    I was going to remove the actuator today, but ran out of time. With the compressor power unhooked I actually heard the rear locker actuate. This was after pulling the stock elocker "guard" and jiggling the wires around a bit. Sitting in my driveway in 4Lo (both with and without CDL locked) I...
  10. Sloth Cruiser

    Elocker/ Air Locker Wiring Mystery (Help)

    That's a good point. I was hoping it was just from the leaky valve cover gasket, but it does smell like gear oil....lame. Unhooked the power pigtail for the time being. Going to try clearing the air line of oil, new pressure switch just as maintenance as i am unsure of how old it is. Though the...
  11. Sloth Cruiser

    Elocker/ Air Locker Wiring Mystery (Help)

    Now lets look under the hood....: Excuse the grease, truck had a valve cover leak that I just fixed. Haven't got around to de-greasing, because free rust proofing.... On the compressor side everything looks good. Hard to tell but yellow/black connect to the solenoid as they should. Dark green...
  12. Sloth Cruiser

    Elocker/ Air Locker Wiring Mystery (Help)

    Here's everything all bundled up. The thick red, yellow, green, and black wires are from the compressor harness. The green and black wires from the compressor are not hooked up to anything. This i believe is correct, see wiring diagram below. Those are for a second air locker solenoid. When...
  13. Sloth Cruiser

    Elocker/ Air Locker Wiring Mystery (Help)

    I need the collective minds of MUD to help me out. First a quick back story: I'm the 3rd owner of my 98 LC. It has a factory rear elocker (yes it's there..) and according to the second owner an ARB installed in the front with ARB CKSA12 compressor. When I bought it I knew the lockers weren't...
  14. Sloth Cruiser

    What have you done to your 100 Series this week?

    Why powercoat them? If you use them as sliders the powercoat comes off just like rattle can. That's a lot of money for something that comes right off the second you slide them on a rock.
  15. Sloth Cruiser

    What have you done to your 100 Series this week?

    Good call on both accounts.
  16. Sloth Cruiser

    What have you done to your 100 Series this week?

    Extremely easy. Just get the 02 sensors off rock auto. They sell the OE Denso ones for significantly less than everyone else. I only did the upstream ones as that's why my code indicated. Actually it just indicated upstream pass side, but it's a good idea to do both at the same time. On my 98...
  17. Sloth Cruiser

    What have you done to your 100 Series this week?

    Changed both upstream 02 sensors. I was lazy and just did it from under the truck. Didn't even jack it up. Super easy 20 minute job to do both sides. Crowfoot 02 sensor wrench makes the job cake. Now let's hope my P0150 and P0153 go away...
  18. Sloth Cruiser

    For Sale  MA: Late Model Toyota misc suspension parts

    I have some misc left over suspension stuff from my FJC. 1. Wheelers rear superbumps. Fits FJC and 4runners. Never installed. $100 shipped 2. Wheelers 3/8" Poly spacer - $10 shipped 3. Wheelers extended top plate studs - $10 shipped 4. Energy Suspension FJC Rear sway bar bushings. Brand new...
Top Bottom