Search results

  1. cps432

    1985 Landcruiser Stolen

    Finger prints..... they gotta be close. How much you wanna bet they’re already in the data base?
  2. cps432

    What did you do with your 60 this weekend?

    My lord...
  3. cps432

    Juanita - Slow & Steady

    I didn’t. I think it would burn off anyhow. And think about the next time you’ve gotta take that stuff apart if it does in fact hold up to the heat... :doh:
  4. cps432

    Harmonic Balancer

    I would get that replaced. It should be smooth with no wobble at all. That’s a problem waiting to happen.
  5. cps432

    Leak from clutch cover area

    The clutch should not have fluid in it. There’s a bigger problem than missing that rubber dust cap.
  6. cps432

    Whistle or grinding high pitch??? (video) FJ62 3FE

    Sounds like a pulley or maybe a throw out bearing. My throw out bearing chirps just a bit if I sit idle in neutral. It’s not too dissimilar to that sound.
  7. cps432

    Not another emissions thread! Ugh.

    You might be on to something. I recall swapping an old ABV into the truck and having fuel delivery issues on top of the emissions problems. I changed the fuel cut solenoid and solved the problem. That’s when I decided to check the continuity of the VSVs and found the bad one. I performed the...
  8. cps432

    Not another emissions thread! Ugh.

    And apply vacuum to the asv to open it. I think that makes sense.
  9. cps432

    Not another emissions thread! Ugh.

    Plug this vacuum line. You can see the diaphragm in the abv needs to be down to direct the air flow away from the air cleaner. I think there’s something else that needs to be rerouted as well but I’m not 100% sure. I think the abv needs to be closed rather than open. I believe I was mistaken in...
  10. cps432

    Not another emissions thread! Ugh.

    It’s been about a year since I had to go through this, but if I remember correctly you need the abv to be open at all times to bypass the air rail and dump it into the exhaust. That’s what the sensors and vsv are doing at certain speeds and temperatures as is noted in the FSM screen shot you...
  11. cps432

    Not another emissions thread! Ugh.

    There’s a balance between CO and NOx. Looks like you’ve got plenty of wiggle room on the NOx. It’ll raise back up as you get you CO to come down. Or you can dump clean air out the tail... and probably pass with flying colors
  12. cps432

    Not another emissions thread! Ugh.

    I forget or I’d tell ya. I just took a piece of a twig and shoved it into the line far enough that I could connect it back to the ABV and the shop wouldn’t see it. It’s that simple. Maybe two lines?
  13. cps432

    Not another emissions thread! Ugh.

    Oh the amount of times I tested things and they passed... I had to actually put a multimeter on the vsv to know for sure it was non functional. I wish I had done that in the first place. I just assumed the smog systems would fail if the vsv was bad. The valve is suppose to open at a certain rpm...
  14. cps432

    Not another emissions thread! Ugh.

    Test your vsv’s... I chased a failing emissions problem for more months than I care to remember. Put hundreds into fixing things that didn’t matter. In the end it was a bad vsv. My work around was to plug one of the vacuum lines to keep the abv open and dump clean air into the exhaust rather...
  15. cps432

    Smog Pump Replacement.

    Last summer
  16. cps432

    Smog Pump Replacement.

    I got a refurbed smog pump from oreilly. I forget what it cost, but they actually had it in stock and they took the old one for a core charge.
  17. cps432

    What did you do with your 60 this weekend?

    That tree was a pine STUD! Pollinating every plant within a hundred miles!
  18. cps432

    Please help - I am an idiot - Hood latch installation

    Pics? That sounds nifty.
  19. cps432

    Question Regarding Relay Rod End Link Rebuild

    Start fresh with OEM.
  20. cps432

    What did you do with your 60 this weekend?

    My birth month and year! Killer find.
Top Bottom