Search results

  1. OregonB

    Front diff out - options/advice

    Thanks! Will do!
  2. OregonB

    Front diff out - options/advice

    C-clip on the CV w/hub damage, right front. Mech thinks clip was not tightened back down fully, I'm having him check other side. As predicted here on MUD, thanks guys.
  3. OregonB

    Front diff out - options/advice

    Front diff on my '05 LX...dang! I am not qualified to do the work, have a local (not chain) transmission guy looking at shortly, and trying to do my homework. -Anyone have experience to share on OEM "good" (used) such as from Nitro-Gear? -Would you replace rear diff at same time? -Other...
  4. OregonB

    Can a beater box-trailer budget redo look better-than-OK behind my LX?

    my 18 yr old box trailer - used for dump hauling, construction, camping, everything - is in my yard getting stripped down....knocking off rust > rewiring harnesses/ new decking> Corroseal > prime > paint. Considered sand blasting then powder coating, but total $ for that route was = to cost of...
  5. OregonB

    part # and/our source for OEM oil pan access cover

    Roger that, thanks so much for the assist.
  6. OregonB

    part # and/our source for OEM oil pan access cover

    05 LX, sorry
  7. OregonB

    part # and/our source for OEM oil pan access cover

    was changing my oil today, finally committed to finding missing (from PO) oval oil change cover....the curved pan with two bolts that allows access to drain the oil pan.,..anyone know the part # for this, good source? Thanks
  8. OregonB

    What have you done to your 100 Series this week?

    New shoes, nothing exciting, but had to do the full wash/rubbing coumpound/wax.
  9. OregonB

    What have you done to your 100 Series this week?

    story?
  10. OregonB

    For Sale 2000 Land Cruiser retro

    Totally off the wall q, but I like style/color on those wheels. Where are they from?
  11. OregonB

    Rotating 5th wheel idea...overkill?

    Thanks guys. That's another $208 for a 5th BFG KO, plus $200+ for an 05 wheel, but makes sense.
  12. OregonB

    Rotating 5th wheel idea...overkill?

    So the one time my wife gets behind the wheel, there's a flat on the front pass side. Totally flat, I would guess. She doesn't notice it, or the handling issues, and drives it 3/4 mile over gravel/rocks to where I'm located. Tire, wheel, all trashed. Of course, I have about 25k on the...
  13. OregonB

    For Sale Cargo area mat '05 470 LX, original

    yes, it's still in my garage (factory original grey, w/cut outs for seats & hold-downs)
  14. OregonB

    For Sale  Cargo area mat '05 470 LX, original

    Extremely lightly used, if at all. PO had in a factory plastic bag, I never used, I put a platform in the cargo area. $20 plus ship costs (shipping maybe $20-25). Portland, OR area
  15. OregonB

    SOLD  Escape Gear seat covers, grey, great condition

    Front seats with armrest and console covers. Less than a year old, very lightly used. These were on my '05 LX, but pretty sure they also work for the same years on LCs (check Equipt Expedition website for correct model years). I may still have the nifty duffel bag for them somewhere. Best offer.
  16. OregonB

    unknown noise from behind dash, left of steering whell

    It sounds a little like a saw going back and forth in wood. I'll fiddle with the climate controls and see what I can get. Thank you!
  17. OregonB

    unknown noise from behind dash, left of steering whell

    it is inside the cabin, not an engine compartment noise. I'll try to attach a vid here.
  18. OregonB

    unknown noise from behind dash, left of steering whell

    (Or steering 'wheel', whatever). I've been getting this noise all fall/winter. Comes from behind the dash, up high, somewhere right of the pillar and left of the wheel. Happens consistently on the first start of the morning, does not happen after car is warmed up, (or it might, but only for a...
  19. OregonB

    Storage System 1: Group Buy and Tech Discussion

    0.05 banana install. Grips firmly over the coating, a few taps with a rubber mallet in places...was going to use const adhesive or hot glue to hold it, but not needed (maybe if the ends start lifting?). Tiny bit of rippling on the tight 90 corner, but not an issue for me.
  20. OregonB

    Storage System 1: Group Buy and Tech Discussion

    Happy with my platform. Added some marine-grade edging to protect the outside of the folding panel. I'm just hard on stuff & clumsy. Looks good, I think.
Top Bottom