Search results

  1. OOCustoms

    busted ignition

    The bracket assembly is part # 45280-60610 from a Toyota dealership- I paid about $265. That's the smallest part group you can order separately. See my post above for details. Sounds like your Park interlock is malfunctioning. Try tapping the shifter while trying to remove the key.
  2. OOCustoms

    busted ignition

    DO NOT order just the cam from any aftermarket seller- they are not the improved design. Just order the correct part # 45280-60610 from a dealership.
  3. OOCustoms

    Rear Axle bracket for upper control arm + sway bar replacement source???

    Hmmm... for some reason when i search under 2003 LC that axle doesn't come up- only 2002 and earlier... I am not aware that anything changed from '02 to'03...thoughts?
  4. OOCustoms

    Rear Axle bracket for upper control arm + sway bar replacement source???

    Hoser, nice work! I was headed in this direction, thanks for the info.
  5. OOCustoms

    Rear Axle bracket for upper control arm + sway bar replacement source???

    There really isn’t enough good metal left for it to be worth it
  6. OOCustoms

    Rear Axle bracket for upper control arm + sway bar replacement source???

    Yeah, I'm starting to go through those guys, Artec, etc.
  7. OOCustoms

    Rear Axle bracket for upper control arm + sway bar replacement source???

    I have already fabbed and welded on the Pan hard bar bracket- just trying to see if there is a source to save labor/time.
  8. OOCustoms

    Rear Axle bracket for upper control arm + sway bar replacement source???

    Hi all- Both my brackets on the rear axle for the passenger side upper control arm and sway bar have broken off- too rusted to repair, I'm going to have to weld new brackets to the axle. Has anyone found a source for these brackets?
  9. OOCustoms

    busted ignition

    No, don't listen to the dealer- they are separate Read my post above.
  10. OOCustoms

    busted ignition

    IGNITION CAM ROD REPLACEMENT FOR 2003-07 LAND CRUISER Ok, so I have a 2003 LC- the metal rod snapped. I ordered the whole bracket assembly part # 45280-60610 from a Toyota dealership- I paid about $265 . When the new bracket arrived I removed and then reinstalled the new metal rod multiple...
  11. OOCustoms

    busted ignition

    Same issue with my 2003 LC... so this part -4528060610- is the correct one?
  12. OOCustoms

    200 Series and Tundra wheels on 100 series photo thread

    This set is different than ga12r1’s- no BBS logo, but essentially the same rim. They fit great, I had to get a set of splined 14x1.5 lug nuts because the stock nuts were too wide- but no spacers needed. This is a 2000 LC, almost done with a full restoration for a client- will post more pics when...
  13. OOCustoms

    200 Series and Tundra wheels on 100 series photo thread

    I found them on Ebay- $899 shipped for 4. I overnighted a set of splined lug nuts, hoping they work, I'll post an update.
  14. OOCustoms

    200 Series and Tundra wheels on 100 series photo thread

    There are tons of people who run the Tundra rims from the last few model years- they all have the same hub bore (110mm) and bolt pattern (5x150mm). I haven't been able to find anyone else with these exact rims, but I can't be the only one???...I've ordered a set of 2018 Tundra lug nuts, I'll...
  15. OOCustoms

    200 Series and Tundra wheels on 100 series photo thread

    It IS around the hub - check the pic. The outer center of the rim curves in over the hub a bit, but there is space between the front of the hub bolts and the rim, it’s sitting flush against the mating surface. I don’t have fitment issues with the rim, it’s just the lug nuts.
  16. OOCustoms

    200 Series and Tundra wheels on 100 series photo thread

    Is this how your hub looked with the rim installed? What lugs did you use? My stock LC lugs are t
  17. OOCustoms

    200 Series and Tundra wheels on 100 series photo thread

    No -the rims are sitting flush against the hub,they just have a different backspacing. the stock lug is way too wide to work with these rims,I’m assuming the tundra lugs are much skinnier- they have to be,right?
  18. OOCustoms

    200 Series and Tundra wheels on 100 series photo thread

    I just received a set of 18" TRD wheels- stock lugs won’t fit- I’m assuming that the tundra lugs are what I need?
  19. OOCustoms

    98-2005 Landcruiser DEPO 1 piece clear head lamp Interest

    HI do you have the DEPO glass headlights (black Housing) in stock?
  20. OOCustoms

    200 Series and Tundra wheels on 100 series photo thread

    Nice! I just put the exact same tires on my "03... I am so psyched with how they ride. Had to do a tiny bit of trimming, but nothing too involved.
Top Bottom