I may be into that front 60 fender....
Local For Sale/Wanted Section! (7 Viewers)
- Thread starter Wayneraintree
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
I have a Dodge HD NV4500 matted to an ORION. This was bolted on an FJ40 and comes with freshly used centerforce clutch, Pilot bronze bushing, levers and a 74-78 fiberglass hump
I bought it from a localish friend who had it on his FJ40 (Arizona built). I no longer going to do a 2F and off center rear axle, there for it’s for sale
Asking $3500 for the combo
Additional info
Advance Adapter plates :
- AA 712551
- AA 510224
Located in Longs Island NY
I bought it from a localish friend who had it on his FJ40 (Arizona built). I no longer going to do a 2F and off center rear axle, there for it’s for sale
Asking $3500 for the combo
Additional info
Advance Adapter plates :
- AA 712551
- AA 510224
Located in Longs Island NY
Also have 5 brand new tires. 4 have been mounted on beadlocks (beadlock’s pending) 5th never mounted. Bought them 2 years ago and have 0 miles. Asking $3000 picked up in Long Island NY
MICKEY THOMPSON BAJA PRO XS 40x13.5x17. Non sticky’s. They are actually pretty soft for a non sticky tire
MICKEY THOMPSON BAJA PRO XS 40x13.5x17. Non sticky’s. They are actually pretty soft for a non sticky tire
looking for stock rear 60 springs.
I have one tired OEM rear 60 series spring.
Selling a set of 5 315/75R16 Falken Wildpeaks brand new asking $1300. Been stored inside whole time, tires in Warminster but I can meet up somewhere. Long story short restoration for my 80 is way more than I can afford so I'm selling off the project and parts I've accumulated to focus on building my 4runner. When I get the other parts back I will post them up here.
Last edited:
1977 fj40 Toyota, 77 Airstream ,99 Audi A8 - cars & trucks - by...
1977 fj40 runs, good project lots of extra parts, doors etc with plow. no time to work on it or extra projects right now so this the 77 airstream and a very clean 99 audi A8 that needs a trans or...
poconos.craigslist.org
not mine, but a 77 project in the Poconos. $6.5k doesn’t look too crazy. Uncut fenders and body in decent shape. has a plow on it so I’m sure the undercarriage is rusted and will need serious work. Looks like the last inspection sticker is from 2018, so maybe not too far gone.
I'd like to move out my collection of 80 parts. These are from a '95 which I cut up and scrapped. All of the OEM parts are free, just want them gone. Off the top of my head, here is some of what I have:
- Most interior parts (tan)
- Tailgate
- Doors (I'm keeping the RR for the '93)
- FZJ80 and trans, ran great when I took it off the road, though I know the head gaskets was too far from the end.
- Windshield
- etc
This will need to happen soon. otherwise it is going to be hauled off to the scrap yard.
- Most interior parts (tan)
- Tailgate
- Doors (I'm keeping the RR for the '93)
- FZJ80 and trans, ran great when I took it off the road, though I know the head gaskets was too far from the end.
- Windshield
- etc
This will need to happen soon. otherwise it is going to be hauled off to the scrap yard.
For Sale - White Knuckle certificate
A good friend and a forum member won this certificate on the CMCC 2022 event. I gave him $50 for it to use it on sliders but plans have changed. Would like to get the $50 back. $200 Certificate good until 07/16/23. I just have a picture of the certificate. I could ask him to mail it...
forum.ih8mud.com
WHITE KNUCKLE CERTIFICATE FOR SALE $200 value for $50 sale
Hi all. Selling what's left of a 97 triple locked Landcruiser. Rear axle is complete, front is missing the center section, wiring harness is intact minus the switch
. Engine (was partly disassembled by dealer before I got it, head is beat), transmission and remaining drive line is there. Windshield, sunroof assembly and dash remain. All four doors complete minus interior door panels as well come with. Also flares are present and included. Minimal rust along lower edge of passenger rear door.Wheels do not come with it (not mine to offer).
Asking $1100 or shoot me an offer, I'd like to get it gone. Located in coopersburg Pa.
Would gladly take a rust free passenger side rear door in partial trade, green preferably.
4 - 35x12.5x17 Ironman All Country M/T tires mounted on Black Rock 17x9 steel wheels (six lug). Wheels are pretty heavy steel and were great on the 80 for wheeling. Valve stems are tucked in nicely, inset of the wheel face.
The tires are well used, but still have some tread on them. I ran these with no spacers on the 80. Believe they are 4.5" back spacing. Set of chrome tapered seat lug nuts included. $300 for all of it.
The tires are well used, but still have some tread on them. I ran these with no spacers on the 80. Believe they are 4.5" back spacing. Set of chrome tapered seat lug nuts included. $300 for all of it.
I'll take them. Just south of you outside Clarks Summit
- Joined
- Jun 27, 2013
- Threads
- 12
- Messages
- 383
- Location
- Margate, NJ
- Website
- margatefishing.wordpress.com
Hello gang, recently while working on my front end I found my passenger side front differential mounting bracket that bolts to the long axle tube broken. Toyota shows zero inventory and it is a discontinued part. Does anyone have one out there I can purchase? Part number is 52380-04010. I am pretty sure it is used on 3rd gen 4runners, 1st gen tundras, 1st gen tacomas, and 1st gen sequoias. If you happen to have one shoot me a PM I would like to purchase it and pay for shipping. Thank you
- Joined
- Jun 27, 2013
- Threads
- 12
- Messages
- 383
- Location
- Margate, NJ
- Website
- margatefishing.wordpress.com
Here she is
So that’s cast aluminum? Or steel? With a rubber bushing at one end?
I wonder if one could make that out of plate and a round tube then reinforced/gusseted together.
Ahhhh, I’m a few hours too late it seems. If for some reason they don’t get taken I’d be all over them.
