Great example why it would be best bought as a unit if I'm ever going that direction....!Thanks!
Yes that Tcase will work with the H55F but you’ll need to make sure since 83 was the first year for the oiler.
The 34mm cases can be machined/clearanced for the low gear sets but typically you end up punching thru the case in 2 or 3 spots. Those can we tig welded shut by adding material to the outside.
The 38mm cases lend themselves to the lower gear sets much better.
Hope that helps.
Georg @ Valley Hybrids @ Cruiser Brothers
View attachment 3251963