KingAir Driver
SILVER Star
- Thread starter
- #161
Polishing the drivers door today. door limiter repair and spray by PO.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
This post is gold!Figured I'd list all the parts I used on the door rebuilds, in case anyone was looking. I did not replace my window regulators as they were still operable.
OEM part numbers or CruiserTeq numbers / Sources.
Window Channel Rubber - OEM 68213-90300 (3 per door)
Window Outer Rubber Scrubber - OEM 68161-60010 (1 per door)
Window Inner Felt Scrubber - WS68170 (1 per door)
Window Metal Plate (Holds Outer Scrubber w/clips) WS68221 (1 per door)
Window Channel Clips - EXT06034 - (6 per door)
Vent Window Weatherstrip - CityRacer, CruiserTeq, or CruiserCorps
Full door surround weatherstrip - CityRacer
Overland Metric
M6x20x1.0 Pan Head Machine Screws - 2 per door.
M6x12x1.0 Pan Head Machine Screws - 6 per door. (includes replacing window bottom stop screws)
Access Panel Panhead Screw Kit - 1 set
Door Window Regulator Screw Kit - 1 set
Front Door Paddle Handle Screw Kit - 1 set
Front Door Striker Plate Screw Kit - 1 set
SOR
Front Door Paddle Handle Regulator Kit - 124-05-KIT
Repo Vent Window Hole grommets - 124-25-PR
Window Rubber Glass Channel (Attach glass to metal regulator bar) - 124-47-A
These were the only parts still available from the previous posted vent window layout.
Wing Window Washer - 94613-10600 (1 per wing)
Wing Window Nut - 94110-40600 (1 per wing) Also used 1 for door handle attachment paddle side (Dual nut)
Wing Window Nut 2 - 94120-40600 (1 per wing) Also used 1 for door handle attachment (Dual nut)
View attachment 3335943
I vote for patina. Those are great!Lucked out on how great of condition these jump seats are! Minor flaking and surface rust at some of the welded joints. Already have the corral seat covers, new foam is on order.
Big question is keep the frames patina and polish them up, or get them redone. Hmmm.
View attachment 3336291
View attachment 3336289
Nice looking cruiser. Where did you get the Bows? I really want to get a set for mine with soft top. Great look!I guess I’ll update with a few pictures. Wrapped up the brake re-fresh with a new master, booster and center soft line. Everything is working great now. Installed the OEM soft top bows. Just enjoying driving it now. Next up will be Headers/exhaust, and valve seal replacement.
View attachment 2785542
View attachment 2785543
Thanks. The bows were just a “right place right time” scenario locally.Nice looking cruiser. Where did you get the Bows? I really want to get a set for mine with soft top. Great look!