Builds Rosie the 40 - Tilda Bogue Service Station (1 Viewer)

[wngrog]

I dug this gem of a photo out of Brendan’s million year old thread on this truck.

I realized if I did not fix that roof now I would be so mad later when the rest of the 40 was so great.

I loaded it up and took it to my “side guy” painter. He’s going to fix the steel then patch the fiberglass and slap a fresh coat of White on it.

On the way back I smashed a Lou’s pork chop.

I barely made it home and did not want to say “honey I’m home” then proceed to make loud gastric noise…..

So I ran to the guest house and I was greeted by one of my outside cats that had been stuck in there since Easter Sunday.

So. Brendan’s dented truck and Lou’s highly fatty lunch saved my cats life. I almost never go in there.

 

[wngrog]

I also packed up Rosie’s transfer and transmission with some future project stuff and sent it off to Valley Hybrids today

 

[wngrog]

Brendon doing the homework.

Correct fiberglass top color code

 

[BJEC69]

I dug this gem of a photo out of Brendan’s million year old thread on this truck.

I realized if I did not fix that roof now I would be so mad later when the rest of the 40 was so great.

I loaded it up and took it to my “side guy” painter. He’s going to fix the steel then patch the fiberglass and slap a fresh coat of White on it.

On the way back I smashed a Lou’s pork chop.

I barely made it home and did not want to say “honey I’m home” then proceed to make loud gastric noise…..

So I ran to the guest house and I was greeted by one of my outside cats that had been stuck in there since Easter Sunday.

So. Brendan’s dented truck and Lou’s highly fatty lunch saved my cats life. I almost never go in there.

View attachment 3303118

View attachment 3303125

View attachment 3303126

View attachment 3303131

Wow I forgot how homely she was when I brought her home….have to love white walled tires and tinted windows on an FJ40…..NOT.
You sure know how to eat well, and
Glad to know you found the cat !! God bless Cruisers and good food!

 

[wngrog]

Did not get much done today. My cousin has a crew free tomorrow so I grabbed a pallet of mulch and pine straw for Red.

Then the glass guys called and the sides and lift gate were available.

Added the later model side gaskets

Then my friend from Cali showed up so we went and screwed around and drank Coors light.

Then red showed us the garden

 

[wngrog]

Sides, rear support and hatch are all in place.

@Racer65 provides corner window gaskets but for a 69, you must source 70+ glass. They are a tight nice fit with the new glass

 

[BJEC69]

Sides, rear support and hatch are all in place.

@Racer65 provides corner window gaskets but for a 69, you must source 70+ glass. They are a tight nice fit with the new glass

View attachment 3304431

View attachment 3304433

View attachment 3304434

View attachment 3304435

It’s nice to know all the tricks!! The “new”top is going to be awesome! Thank you!!

 

[badsamaritan]

I'm pretty jeaous of all of this reflector p*rn in this thread. If there happens to be a extra set of Ambers I'd be interested in purchasing them from the owner.

 

[Skreddy]

We got a period correct tool roll via @jblatz for Rosie

Check out the cartoons in the 1969 manual.

View attachment 3298488

View attachment 3298489

View attachment 3298490

View attachment 3298491

View attachment 3298492

Probably the same manual: this from my 1970. I can’t sit cross legged like that at all, Nevermind while supposedly driving a 3 pedal 40!

 

[wngrog]

Back on this girl.

Engine bay strip and clean. Coming along nicely

This one was pretty clean already. Just took a layer of grime off and hit it with the buffer.

 

[wngrog]

Laid some paint down and then started cleaning and replacing parts with some of this old OEM goodness.

Also just got word from Roark at Valley Hybrids that the Trans and Case arrived safely and he’s getting on it asap. It’s good to have a little equity out there for timely work. Most of the time I have this stuff here but we wanted to use the stuff this 40 was born with.

 

[BJEC69]

Back on this girl.
View attachment 3306375
Engine bay strip and clean. Coming along nicely
View attachment 3306376

This one was pretty clean already. Just took a layer of grime off and hit it with the buffer.

Now clean underwear to go with that clean tee-shirt! Thank you!!

 

[wngrog]

I think I’m about to tackle this steering box. Anyone know the proper procedure to dissect all of this properly? I actually don’t have a real paper FSM here to read up on how they say it’s done.

 

[OlYellr]

This?

 

[wngrog]

Got it. Looks fun. I’ll report back

 

[wngrog]

I’m going to be shocked if I manage to get all this s*** back where this truck goes forward and backwards ever again.

I may have to fly @landcrusher909 in to help.

How could anyone dream up something so complicated?

 

[wngrog]

Algazy rebuild this box some years ago it seems.

No way I’m calling him though. That’s where I draw the line

This stuff in the paint booth is going to have to cure overnight. It’s like 200% humidity today.

 

[1MAC]

I had a tough time getting a current paint formula for Shell Ivory.

 

[wngrog]

I had a tough time getting a current paint formula for Shell Ivory.

What did you end up using?

 

[red66toy]

I’m going to be shocked if I manage to get all this s*** back where this truck goes forward and backwards ever again.

I may have to fly @landcrusher909 in to help.

How could anyone dream up something so complicated?

View attachment 3308970

View attachment 3308971

View attachment 3308972

View attachment 3308973

Rube Goldberg style at its finest. When it works well it’s super fun…. Well at least to me.