12ht injector brass seals (1 Viewer)

[ukaviator]

Hey guys,

Rebuilding my injectors and there is a brass seal at the bottom prior to the retaining nut that the FSM makes no reference too.

1. How do I get this off?
2. Are they necessary/reusable?
3, Any idea why the FSM makes no reference to them?! Wondering if there is anything else in there I should know about that’s missing

Thanks

 

[duncanrm]

12HT Nozzle Seat.. FU-9 in the FSM.. With fresh injectors I always replace them.

 

[ukaviator]

12HT Nozzle Seat.. FU-9 in the FSM.. With fresh injectors I always replace them.

View attachment 3285337

Ok I see that pic now

That’s the only reference to it in the whole section!

How do you get them off? Just gently pry them? mine are locked on there tight!

 

[duncanrm]

Yes, wiggle them off - somehow. On the 2H, they are usually stuck in the cylinder head so you're in much better shape already!

 

[chapel gate]

Rotate them with a pair of pliers.
Breaks the carbon "seal".

 

[ukaviator]

Rotate them with a pair of pliers.
Breaks the carbon "seal".

Thanks!