Sold!
Arizona Classifieds / For Sale / Wanted (13 Viewers)
- Thread starter blatant
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Living in the Past
SILVER Star
Curious is this for a factory application? Wondered if this could be used in a mini truck power steering conversion and do away with the center arm. Never looked into it and have never seen it mentioned.
You are going to be getting wasted on all of that IPA you'll be getting
Pm sent
I would almost be interested in the car top carrier
Hey there! Anyone got a arb bumper for a 80 series in phoenix area ?
I’m a guy… but I’m not in a position to take on a project right now. But I might be able to give pointers if you need any.
I’m a guy… but I’m not in a position to take on a project right now. But I might be able to give pointers if you need any.
Built and installed this 24’ gate and concrete threshold last summer
Last edited:
@justweldit comes to mind - he made the tube doors for my 40 - AFAIK he moved to Northern AZ
Shawn Engard – Made In Clarkdale – 36th Annual Art Showcase
madeinclarkdale.org
Last edited:
Sold!
Free now. Come get it before it gets tossed.
Bump It Offroad 80 Series Skid Plate
I bought this from BIO about 2 years ago and never installed it. I have since gone a different direction and need it gone.
I have the plate and the arm that gets welded on, but have lost the bag of bolts it came with. $180 plus shipping on the site, but I'll take $150 as is. You will save about a good bit, but will have to supply your own bolts. This thing is seriously beefy! If you bring a sixer of non-IPA barley pop, I can help install and weld it up too.
Jason
I bought this from BIO about 2 years ago and never installed it. I have since gone a different direction and need it gone.
Skid Plates For 80 Series Toyota Land Cruiser
Skid Plates For 80 Series Toyota Land Cruiser - Bump It Off Road - Windsor Colorado.
www.bumpitoffroad.com
I have the plate and the arm that gets welded on, but have lost the bag of bolts it came with. $180 plus shipping on the site, but I'll take $150 as is. You will save about a good bit, but will have to supply your own bolts. This thing is seriously beefy! If you bring a sixer of non-IPA barley pop, I can help install and weld it up too.
Jason
SOLD!!!
Raslarr 4" Stainless Steel Snorkel
I hand carried this back from Australia in February 2020, and have never installed it. I planned it to go on my LS swapped 80, then my latest build, but think I will keep the quarter panel unmolested instead. I need this gone and would like to see it installed on someone's rig and put to use. A quick note, this is the last 80 Series Snorkel Raslarr ever produced. They have since gone full in on Nissan Patrol stuff and stopped making snorkels altogether.
I paid $636.36 AUD for this thing, which in todays money is ~$440 USD. $400 flat takes it home and you save the ~$150 in international shipping. It will use the same template as an ARB/Safari which I have and can make a copy of if needed. If you already have a Safari installed, it will just be enlarging the hole according to the Raslarr template and some new holes/rivnuts in your A-pillar.
***I just remembered you will need to order a silicon adapter to go from 4” to 3” if you mating it to the stock air-box. i can help find one too. Or we can roll a 4 inch tube and weld it into the airbox. I also happen to have a spare factory air box I could modify….i have too much stuff.
IM me here or text me at 501-772-6109
Jason
Raslarr 4" Stainless Steel Snorkel
I hand carried this back from Australia in February 2020, and have never installed it. I planned it to go on my LS swapped 80, then my latest build, but think I will keep the quarter panel unmolested instead. I need this gone and would like to see it installed on someone's rig and put to use. A quick note, this is the last 80 Series Snorkel Raslarr ever produced. They have since gone full in on Nissan Patrol stuff and stopped making snorkels altogether.
I paid $636.36 AUD for this thing, which in todays money is ~$440 USD. $400 flat takes it home and you save the ~$150 in international shipping. It will use the same template as an ARB/Safari which I have and can make a copy of if needed. If you already have a Safari installed, it will just be enlarging the hole according to the Raslarr template and some new holes/rivnuts in your A-pillar.
***I just remembered you will need to order a silicon adapter to go from 4” to 3” if you mating it to the stock air-box. i can help find one too. Or we can roll a 4 inch tube and weld it into the airbox. I also happen to have a spare factory air box I could modify….i have too much stuff.
IM me here or text me at 501-772-6109
Jason
Last edited:
