rear body mounts (3 Viewers)

[xtiaan2000]

Anyone jonzy for this?

$10,099

 

[PabloCruise]

Anyone jonzy for this?

View attachment 3178843

$10,099

Over the $5k limit, I'm out!

 

[Pighead]

Anyone jonzy for this?

View attachment 3178843

$10,099

I got a spare already, thanks though

 

[xtiaan2000]

Starting to think about springs for this rig.

I want to get a 3” lift out of them.

Dobinson
Old man emu
Slee


What y’all think. Any that you have had better or worse experiences?

I have a pair of Delta radius arms coming (some day). They are set up for. 3” lift and will push the front axle out an 1” foward.

 

[xtiaan2000]

That which is nonexistent is now exists!!

For all those that have the backlight headlight switch ToyotaMatt presents the solution!

And different colors to make the perfect match with all your custom dashboards!

 

[xtiaan2000]

About to start putting fluids in.

engine oil - 2002 with 125k
transmition
transfercase
differencials

Starting with these. I am thinking 5w30 or 5w20 for the engine., synthetic?
Everything else I have heard 90weight.
My buddy just said he used sae145.
I remeber reading that Jmack suggested Catro optimol optigear.

What ya'll think?

 

[RUSH55]

5w30 engine oil

 

[scrapdaddy]

Redline 75w90MT transmission and transfer case. Just what I use

 

[xtiaan2000]

Got the JMack backup light conversion switched to the new cab!

 

[xtiaan2000]

Gonna start fixing these guys up. Top one is good

Figure I will get the right bolts and reduce the head and epoxy or JBWeld into the holes. Hoping that I can get the old broken studs out making holes like shown

 

[xtiaan2000]

What you think better JBWeld or epoxy?

 

[xtiaan2000]

Got these can’t wait to see them in action!

 

[bobm]

JB and I use Castrol in engine and Amsoil in drive line! SUPER STICKY

 

[MacDaddyRabbit]

Starting to think about springs for this rig.

I want to get a 3” lift out of them.

Dobinson
Old man emu
Slee


What y’all think. Any that you have had better or worse experiences?

I have a pair of Delta radius arms coming (some day). They are set up for. 3” lift and will push the front axle out an 1” foward.

The front OME ARB FJ75 mediums for the front CS006F
For the rears I married the two long OEM 55 springs to a pack of CS004F for a 60, after removing the bushing spring and cutting the curve out of the #2 spring.
Truck sits perfectly level, travels well, and gave me approx 3" lift. The 75 springs upfront pushed the axle out about a inch. You'd have to ask someone w more advanced knowledge than me how far exactly, but that may work well w your Delta radius arms...

 

[xtiaan2000]

I miss spoke. I am running coils not springs.
Killer beta tho!!

 

[xtiaan2000]

Kinda stoked right now. Turned the round head into a rectangle and while it was still hot just pressed it into the plastic, which gave way til it bottomed out. Now just gonna back it up with JBWeld!

Now I have stainless posts instead of brass or whatever gold material those old posts were.
Maybe they were gold!

 

[RUSH55]

Redline 75w90MT transmission and transfer case. Just what I use

That is what I figure will be my eventual go-to. NV4500 was recommended to use AC Delco GL-4 75W-85, which has a GM part number, that is now obsolete. I was lucky to scrounge the last that my local GM dealer had and a few more on eBay to use in both the trans and t-case. The Redline looks to be the replacement.

 

[WarDamnEagle]

I use Redline Synthetic MT90 in my manual transmissions. I use the 75W90 in the transfer and diffs.

 

[xtiaan2000]

I am looking for some new lenses to match the new stainless screws.

What is George’s valley hybrids addy? I love the Troopy!!!!!!!!!!!!!!!!!!!!

 

[scrapdaddy]

ValleyHybrids – Built to get you Home

valleyhybrids.com

Cruiser Outfitters