Wanted 74 pig: plugs with wire harnesses, coil, etc. (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Mar 31, 2014
Threads
4
Messages
46
Location
925/831
Location
United States
**Edit 11-22-22** Found what I was looking for. Thanks


Looking for a few parts for a 74 pig (Dec 73 build). I want to get this running so I can enjoy it. Cross posted on FB FJ55 page.

Looking for:

P/n for all the seat belt bolts. P/n for the bolts that hold the rear seat backrest to the floor.

**** Updated list below 10-12-22 ****

Transfer case boot with metal ring and bolts

Positive battery cable with fusible link (thick white wire)

Coil, coil bracket with ignitor

Photo 1. White wire and black harness below the fan housing. Need the plugs that were cut from these (I take it it connects to ignitor?).

Photo 2. driver's side. What does this connect to? Answer: oil pressure sender

Photo 3. Plug that goes to alternator, and other connectors that were cut from this harness.


PXL_20221006_190713042.jpg


PXL_20221006_190624320.jpg


PXL_20221006_190545899.jpg
 
Last edited:
Firewall to rear lights harness plugs?

2- and 3-prong plugs

PXL_20221010_174128506.jpg
 
I'm waiting on Denscustoms and another member to confirm they have the plugs and harnesses I need, but wanted to show what plugs/harnesses I need.
 
Coil/ignitor harness wires.

View attachment 3136990
Red w blue stripe, and blue w red stripe go to your reverse indicator located on 4 spd tranny
Black wire w stripe goes to pin on the starter
Black wire w yellow stripe (bigger one) goes to ignitor
The second black/yellow, and the green/yellow not certain yet..I'll send you some color/size correct wires from a donor loom..
You need to buy an ignitor/coil/bracket, complete if possible, and a positive battery cable w a fusible link..connect the large white solo wire to the link.
 
Red w blue stripe, and blue w red stripe go to your reverse indicator located on 4 spd tranny
Black wire w stripe goes to pin on the starter
Black wire w yellow stripe (bigger one) goes to ignitor
The second black/yellow, and the green/yellow not certain yet..I'll send you some color/size correct wires from a donor loom..
You need to buy an ignitor/coil/bracket, complete if possible, and a positive battery cable w a fusible link..connect the large white solo wire to the link.

Thank you for the help!!

Want list updated.
 
Thank you for the help!!

Want list updated.


i have :

- NOS Coil w/ igniter and mounting bracket OEM


- Alternator INPUT Plug repair KIT

- Yellow Wire w/ black tracer stripe for OIL sender , rePair Kit , comes w/ special positive grip detent ball locking terminal for oil sender button connector .....fyi







1668855821359.png



1668855796509.png




1668855860492.png


1668855879359.png

javascript:;


1668855923940.png


1668856028970.png


1668855994938.png
 
i have :

- NOS Coil w/ igniter and mounting bracket OEM


- Alternator INPUT Plug repair KIT

- Yellow Wire w/ black tracer stripe for OIL sender , rePair Kit , comes w/ special positive grip detent ball locking terminal for oil sender button connector .....fyi







View attachment 3172326


View attachment 3172325



View attachment 3172327

View attachment 3172328
javascript:;


View attachment 3172331

View attachment 3172333

View attachment 3172332

Ah, thanks!

I ended up getting a dui/dei type distributor, so i don't need a coil/ignitor anymore. And i already ordered/received the other parts from other vendors.
 

Users who are viewing this thread

Back
Top Bottom