- Thread starter
- #21
Rebuilding Rebecca (1 Viewer)
- Thread starter Samuel642000
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
- Thread starter
- #22
And finally back on the CDT
- Thread starter
- #23
One of my favorites with our shadows
Around midnight while hunting a camping spot the Garmin recommended a "shortcut" that quickly turned into what could best be described as a wagon trail. Said trail ended up dead ending nearing a mountain pass. In the interest of not back tracking roughly an hour I decided to keep going over the pass with good sized drops on both sides. We made it and the shortcut added roughly an extra hour to an hour and a half to get to camp.
Come to find out we had ended up off the trail but on the Oregon Trail. Not quite a covered wagon passing but was interesting to say the least
Around midnight while hunting a camping spot the Garmin recommended a "shortcut" that quickly turned into what could best be described as a wagon trail. Said trail ended up dead ending nearing a mountain pass. In the interest of not back tracking roughly an hour I decided to keep going over the pass with good sized drops on both sides. We made it and the shortcut added roughly an extra hour to an hour and a half to get to camp.
Come to find out we had ended up off the trail but on the Oregon Trail. Not quite a covered wagon passing but was interesting to say the least
Last edited:
- Thread starter
- #24
Made it to the Tetons
Yellowstone
And finally our turn around, Canada
- Thread starter
- #25
Hit a milestone on the way home
After the trip I really haven't changed anything. I daily it after discovering how much I enjoy driving it and sold my other vehicles last year.
Now that I bit the bullet and started this thread I hope it gives me the to push to install all the items I have on the shelf for it.
After the trip I really haven't changed anything. I daily it after discovering how much I enjoy driving it and sold my other vehicles last year.
Now that I bit the bullet and started this thread I hope it gives me the to push to install all the items I have on the shelf for it.
- Thread starter
- #27
It was! We had a great time learning how to coexist for that long in a small space. Highly recommend just going for it with a very loose agenda.
- Thread starter
- #28
Got some stuff from solve function. Been looking for a replacement overhead light that switched from red to white. Pretty easy install just make sure the led board is centered in the housing .
Good stuff, I love the winch setup.
QuackAxel
SILVER Star
Tell me more about your drawers! Is that 1/2"? What variety wood? How did you attach everything? Looks like just screwed butt joints?
- Thread starter
- #31
Thank you! It works and I like it but ill eventually build a front bumper for it
- Thread starter
- #32
It's 1/2 inch Birch or Pine if I remember correctly. You are correct it's just butt joints but it has wood glue screws, and staples holding it all together.
Found some drawer slides on Amazon and attached them using these
The fridge slide is held on with this style nutsert (I can't remember the exact size I used but these are similar)
- Thread starter
- #34
Also for grins I went ahead and tossed in the new to me Slee double Cardan front drive shaft
QuackAxel
SILVER Star
Do you remember what the thread pitch was on these? 1.0? It's not listed anywhere.
- Thread starter
- #36
I have no idea, I just matched whatever I got with the needed hardware.
- Thread starter
- #37
Changed all my cluster bulbs to LEDs, fixed the D light, and replaced all the inop bulbs in the dash.
Full Bright
Full Dim
D light
Full Bright
Full Dim
D light
- Thread starter
- #38
And got the auto up done
- Thread starter
- #39
Finally had time to get all the dash lights operating and the oil pressure gauge reading correctly
