SOLD Cable locking differentials for 60 and 70 series models (2 Viewers)

[Vitek]

Location

United States

Hi

For sale several pairs of factory cable locking differentials for 60/61/62 and 70/73/75 series.
Only the diffs, no cable and handles, you can make your own or use air activation.
Shipping from Belgium on buyers cost.
1500 Eur/ pair, only front or rear is also possible.

 

[bottombracket]

OH WOW

 

[joekatana]

Those look like they came from the old Cruiser land stock

 

[coldtaco]

Do

Those look like they came from the old Cruiser land stock

you know if you would need a different set of axles or do you use the same axles for non-locker applications?

 

[joekatana]

Do

you know if you would need a different set of axles or do you use the same axles for non-locker applications?

You can modify the stock housing to make these work

 

[Splangy]

Do

you know if you would need a different set of axles or do you use the same axles for non-locker applications?

I believe you’ll need axle shafts with longer splines (at least one side IIRC) and I believe you’ll need a full floater to run these.

 

[coldtaco]

So the axle shafts from my

You can modify the stock housing to make these work

HJ75 will work?

 

[joekatana]

If it has a full float rear it should work , I brlieve you just have to notch a bit out off the housing to make room for the shifter

 

[coldtaco]

If it has a full float rear it should work , I brlieve you just have to notch a bit out off the housing to make room for the shifter

thanks Joe, I did know about notching the housing.

 

[roma042987]

you will need a short side rear shaft and long side front shaft with longer splines to accommodate locking puck/hub

 

[roma042987]

Unfortunately, you will likely need unchipped gear sets as well.

 

[LimitingFactor]

PM sent