Wanted Parts for h55f conversion for fj62 (1 Viewer)

[Eluu92131]

Location

United States

Looking for the following parts as suggested by the shop doing my conversion.

Late fj60 85-87 bell housing marked 3f
Late fj60 pedal hanger assembly 85-87
Late fj60 transmission cross member 85-87
4 speed flywheel
Late fj60 clutch fork 85-87

Thanks,
Eric

 

[cruisermatt]

In addition to those parts you will also need my wire harness and clutch plumbing kit unless you manage to find an intact clutch hardline from a 60 (doubtful).

I also sell a complete crossmember kit (not listed on my site) but it is designed to use the more commonly available 75-85 2F bellhousing.
I have a used 85-87 clutch fork I will sell along with a new matching throwout hub and clips if you do decide to stick with 85-87 parts.

60 Series Land Cruiser Auto to Manual Conversion Wire Harness - H55f — CruiserMatt's Off-Road & Performance

Converting your FJ62 or other automatic 60 series to a manual transmission using an H55f or H42? This wire harness provides a fast plug-in solution for your NSS and reverse lights. Take the guess-work out of your project. Other manual transmission options available upon request -please contact for

www.cruisermatts.com

60 Series Auto to Manual Clutch Plumbing Kit — CruiserMatt's Off-Road & Performance

Includes custom pre-bent stainless steel clutch line, OEM Toyota rubber slave cylinder hose, and our custom stainless mounting tab. Shipping cost included in price.

www.cruisermatts.com

 

[fliphkd778]

I have a flywheel, where are you located?

 

[Eluu92131]

Im located in san diego.

 

[Jeff Elliott]

I also sell a complete crossmember kit (not listed on my site) but it is designed to use the more commonly available 75-85 2F bellhousing.

Would that work as a starting point for the H55F conversion in a 40? I'm collecting parts as well and that's one I'm missing.

 

[cruisermatt]

Would that work as a starting point for the H55F conversion in a 40? I'm collecting parts as well and that's one I'm missing.

I am going to be making a narrower version for 40 series. We have one coming into the shop very soon that will be prototyped

 

[cruisermatt]

Im located in san diego.

Never got any follow-up from you

 

[Jeff Elliott]

@cruisermatt please put me on the list. Will need one of those!

 

[Yotajeff]

I have the pedal assembly, crossmember, and flywheel in los Angeles