Are the calipers the same for the pre-8/92 and post-7/92 rear disk brakes. My 80 I think has the earlier type with smaller (311 mm dia) rotors. I believe the later ones have a far bigger (about 330 mm?) rotor.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Item | FZJ80 Part Number | Same as HDJ81 | Qty Required | Notes |
Backing plate (RH) | 46504-60040 | No. (New part required) | 1 | |
Backing plate (LH) | 46504-60041 | No. (New part required) | 1 | |
Rotor (RH/LH) | 42431-60170 | No. (New part required) | 2 | |
Caliper (RH) | 47730-60110 | Yes. (Can reuse old part) | 1 | |
Caliper (LH) | 47750-60110 | Yes. (Can reuse old part) | 1 | |
Caliper hose (RH) | 90947-02614 | Yes. (Can reuse old part) | 1 | |
Caliper hose (LH) | 90947-02615 | Yes. (Can reuse old part) | 1 | |
Parking brake shoe (RH) | 46540-60030 | No. (New part required) | 1 | Parking brake arm mounts on this shoe |
Parking brake shoe (LH) | 46580-60030 | No. (New part required) | 1 | Parking brake arm mounts on this shoe |
Parking brake shoe center | 46550-60040 | No. (New part required) | 2 | This is the opposing shoe for both sides |
Brake pads | 04466-60020 | Yes. (Can reuse old part) | 1 Set | |
Bellcrank stopper bolt | 47639-30020 | No. (New part required) | 2 | Early (<1994) vehicles have all-metal stopper bolts. Late (>1994) have a rubber portion on the end of the stopper bolt |
Backing plate to rear axle housing nut | 94130-60600 | No. (New part required) | 2 | |
Bellcrank arm (RH) | 47624-60021 | No. (New part required) | 1 | |
Bellcrank arm (LH) | 47625-60021 | No. (New part required) | 1 | |
Parking brake shoe lever | 47611-60030 | No. (New part required) | 1 | Labeled "left, right" even though left and right have different part numbers. Compare with old part to see which one goes on which side. |
Parking brake shoe lever | 47612-60030 | No. (New part required) | 1 | Labeled "left, right" even though left and right have different part numbers. Compare with old part to see which one goes on which side. |
Parking brake wire | 47616-60020 | Yes. (Can reuse old part) | 2 | |
Bellcrank boot (RH) | 47633-60010 | Yes. (Can reuse old part) | 1 | |
Bellcrank boot (LH) | 47634-60010 | Yes. (Can reuse old part) | 1 | |
Bellcrank pin | 90249-08075 | Yes. (Can reuse old part) | 2 | |
Bellcrank bracket (RH) | 47628-60010 | Yes. (Can reuse old part) | 1 | |
Bellcrank bracket (LH) | 47629-60010 | Yes. (Can reuse old part) | 1 | |
Bellcrank pin C-washer | 90213-06013 | Yes. (Can reuse old part) | 2 | |
Parking Brake Hardware kit* | N/A | Yes. (Can reuse old parts) | 1 | *Toyota doesn't sell kits. I bought item #17394 from Advance Auto Parts |
The OEM part number for HDJ81 rear brake pads is 04466-60020.My 1992 HDJ81 has disk brakes in the rear, does anybody knows the OEM parts numbers for the brake pads?